Pictures!

[ambulancevoice]

dont tell me you actually researched that

Yep . You should try it.

nah, ive got better things to do that look up information about the coke cola logo just to prove somebody wrong

[GREEN FUZ]

Yeah, you`re right, why bother looking things up when it`s easier to make unfounded statements off the top of your head.

[tehfunk]

My first submission.

Also my first 'design', it's a multi-mode (high-pass, low-pass, band-pass) filter with a simple fuzz circuit in front of it for if you want some more harmonic content. With the fuzz knob (hehe, knob!) turned fully down, the signal is pretty much completely clean.

Shame I drilled the LED bezel too close to the stomp switch though

It's called the Doctrine, my soon-to-be-a-massive-multinational-pedal-manufacturing-company is called Ethic.

Wow! I really like this, it sounds like a great circuit, but I also really enjoy the simplicity of the exterior with the clean logo.

[Renegadrian]

GREAT!!! Is that COKE font?!

the coke cola logo isnt a font

http://www.fontparade.com/index.php?page=font&id=100
This is the COKE font.

[darron]

repainted and decaled. swirlies didn't really do it for me.

WOW! extremely impressive!

[DimebuGG]

[bleubleu]

Nice pedalboard dime, lots of knobs. What kind of switches are thoses ?

Can we get a shot where we can see what kind of pedals they are ? It is hard to see with the lighting and all. I see a power supply, a sans amp gt2, but what else is in there ?

Mat

[Barcode80]

my new SRV special TS808 from MarkM's gallery. VERY nice and aggressive flavor of screamer.



guts...

[fisherbim]

 
wow i really love this part of town.

[disto]

my new SRV special TS808 from MarkM's gallery. VERY nice and aggressive flavor of screamer.

interesting finish what type of paint did you use

[kawayanstrat]

Yeah, you`re right, why bother looking things up when it`s easier to make unfounded statements off the top of your head.

I thought this is a DIY stompbox thread?

[kawayanstrat]

Ikaw pala si raigo250 sa Phil Music.hehehe

[fisherbim]

 
ang galing ng kawayanstrat...
kaw po ba gumawa nyan?

fish

[guitarman89]

can you post a picture of that switch? It's interesting...

[Barcode80]

my new SRV special TS808 from MarkM's gallery. VERY nice and aggressive flavor of screamer.

interesting finish what type of paint did you use

it is rustoleum textured stone finish in brown, then a light clear over top. looks even better in person

[kawayanstrat]

ang galing ng kawayanstrat...
kaw po ba gumawa nyan?

fish

Pinagawa ko sa Province namin. (translation:I had it custom made in our province)

Anyway here's a micro boost i made.

[GREEN FUZ]

I thought this is a DIY stompbox thread?

It is. 

[kawayanstrat]

I thought this is a DIY stompbox thread?

It is. 

Then we should be talking about diy stompboxes here,not pointing out someone's  mistake.

[GREEN FUZ]

Mark, graphic design happens to be an interest of mine. I was curious enough to look up a few things about the Coca-cola typeface and post them on the thread. It wasn`t completely OT as someone else had already brought up the subject. Lets leave it at that and go back to what the thread is meant to be about. Sorry if I p****d you off.

[foxfire]

my last few builds and my current pedal board. nothing fancy as i don't have the patience to watch paint dry, wish i did though... the top one is a fender blender, i used the schematic over at Fuzzcentral. i haven't gotten to crank it yet so it doesn't have a home on my board yet but, i expect it will be a real thumper. i had enough fun with this one that if fender had been nice enough to over charge for the reissues i'd think about making a few for sale. bottom left to right- byoc phase 90, 4 knob rat (love the lube) with a metal can 308 and 2 diode options (i love this pedal), and finally my jerk muff. it makes for a nice EQ/boost in front of the rat. i'm so happy with what i've got now that i'm having trouble wanting to build anything else. rylan