Pictures!

[lazerphea]

Good you tried to hide "Smoke kills" !!! 

Yeah, it always gives me the creeps!

[juse]

Ooh, nice guts on the Clari(not).

This is a dual channel germanium booster. One side is an all germanium Electra Drive with NPN 2SD72 from Sanyo. The clipping diodes are just two 1N34A's in series off the output to ground. The other channel is an AC163 PNP Rangemaster. This is my first terminal strip build.

Full'a mojo parts, down to the cloth-covered wire.... good job!

[punkin]

wow...that's pretty to look at! NICELY DONE

[danielzink]

Seek Wha ?

thanks to MicFarlow for the enclosure !





Dan

[soggybag]

Clone of everyone's favorite 5 knob fuzz. I had been wanting to try out these long legged pots from Small Bear. With the idea of mounting the PCB to them. I also wanted to make a box with the knobs on the side to try this design out.

[frequencycentral]

Seek Wha ?

thanks to MicFarlow for the enclosure !

[tehfunk]

simplicity at its best... good job!

[solderman]

Seek Wha ?

thanks to MicFarlow for the enclosure !





Dan

If this one does what I think it does I'm very interested of the schematics. Is it a sequence stepper that steps the sequence forward over the sweep and each pot is used to modulate the frequency at that actual step and the LED:s running in step tempo. The black pot is for controlling the step speed and the switch to change filter caps for modulation frequency.

Am I on the correct ball plain here???

//Solderman

[deaconque]

Watch the video here.  http://zvex.com/seekwah.html  It should clear up your questions. 

[Auke Haarsma]

incredible work being posted here! I'm not really talented at doing nice painting etc. However, finished the Echobase last weekend. Had a few small probs, but long story short... here's the pics:






Echobase with indicator leds for Tails and Modulation. And: tempo-LED which blinks with the uhm, tempo.

[ShortScaleMike]

Very cool.

A Fender Blender I built for a friend. I enjoy building these:

[dano12]

10 watt class D amp. This was a beast to build

[nosamiam]

Seek Wha ?

thanks to MicFarlow for the enclosure !





Dan

Wow, that is reeeeeaaaally clean. Very impressive. May I ask where you get those pots?

[MicFarlow77]

Seek Wha ?

thanks to MicFarlow for the enclosure !





Dan

Awesome Dan! Excellent work!

[danielzink]

Seek Wha ?

thanks to MicFarlow for the enclosure !



Dan

Wow, that is reeeeeaaaally clean. Very impressive. May I ask where you get those pots?

SmallBear


Dan

[solderman]

Hi
This is the Purple Haze. I must say that I'm a quite satisfied with the result my self. I really like this purple colour and the yellow led that goes with it.
It's a Si Fuzz, based on the old fuzz face design with a five changes and added caps.

See the "Si Fuzz Face Vs Ge Fuzz Face shoot out" tread for sound samples.

Gut shots found on the 1590A Picture tread



//Solderman

[mongo]

Seek Wha ?

thanks to MicFarlow for the enclosure !





Dan

Awesome Dan! Excellent work!

I'd love to get a look on that PCB! is there a project for this somewhere?

[mongo]

Clone of everyone's favorite 5 knob fuzz. I had been wanting to try out these long legged pots from Small Bear. With the idea of mounting the PCB to them. I also wanted to make a box with the knobs on the side to try this design out.

that transparent battery snap is very cool!   where do you buy those?

[gtudoran]

A litte artwork i'm waiting for opinions.

[Fuzz Aldryn]

Hi,

though not an a-enclosure approache, yet another miniaturizing of a well known stompbox. It might not be the first one at all, but the frist one I've seen yet.

Dr. Boogey in a b-enclosure (the toogle switch is due to a custom request; an alpha dpdt is about the same size so it also could have been done with a footswitch)



for comparison its ancestor:



Regards
Helge