Pictures!

[Renegadrian]

... The center switch is a "Flipper" that allows you to switch the order of the circuits so you can have the 808 -> Boost or Boost-> 808....

Mind to share the wiring of that switch?!

[dap9]

... The center switch is a "Flipper" that allows you to switch the order of the circuits so you can have the 808 -> Boost or Boost-> 808....

Mind to share the wiring of that switch?!

Sure, a fine fella who goes by Amp Surgeon drew this up for me.  I wired it to the 3PDTs footswitches, but can't remember exactly what I did.  I'm sure people will figure it out easily enough.  It only took me a few tries, lol.

[Insanekane]

I did try to do swirls by old fashion way, but all I got was a huge mess and colorful fingertips. 
So I tried reverse etching and at least I'm happy with the results 

Great work!!! Congratulations, very good idea! Could I use it?
That looks just beautiful. Excellent etch work! Look mine on www.ruzguitargear.tk 

Thanks  
You have good looking etches too.
Sure you can use the idea. Perhaps a multicolor swirly rev. etch??  

[disto]

I dont really like swirl pedals but this is amazing, how did you create the patterns before etching?

[Insanekane]

I dont really like swirl pedals but this is amazing, how did you create the patterns before etching?

I found some swirl patterns and edited them by photoshop to fit my needs.

[itsmekeuh]

Here are two of my humble attempts...
Some minor mistakes when I designed the grapics , but it is still ok for me.
First 3 pics are an Easy Vibe and the last 3 a Thor.

EasyVibe:




Thor:

[Valoosj]

Yeah, Belgians do make some fine stompboxes 

[~arph]

..and beer

[slacker]

Indeed they do 

[Renegadrian]

wtf lol!!!

[Valoosj]

We've got a couple 100 more of those

And lets not forget about the chocolates!

[SonicVI]

or their sprouts.

[Nitefly182]

Forcedfire's Magnus Modulus.

[frequencycentral]

Beautiful wiring. Just perfect.

[Nitefly182]

Beautiful wiring. Just perfect.

Thanks! Its almost up to Frequency Central standards

[Renegadrian]

A couple of the latest - I don't build so much those last months 

FUZZ FACE


I never built the FF so I said "hey I have to!!!" so here it is...I wanted to make it look good, so I chose those python look, actually it's decoupage paper glued on - no snakes harmed in the making...
It houses a couple of BC108C, a LOT of gain, but can be easily tamed down with the gain pot or the volume on the guitar, it also cleans up more than I thought...And yes, I soldered two res in series to get the value needed...you can clearly see it...
Altough it's not my cup of tea, it's a good effect and not so difficult to build...

TUBE SCREAMER - TS808


A customer asked me to build one inside the enclosure he had - As above, I never built a TS so I said "hey I have to!!!"
It was a PITA to house 3 pots, jacks, battery, power jack, switch and millenium bypass + LED. Tetris anyone?! 
I played with it for a whole afternoon waiting for him...It's a GREAT effect with the right settings, say gain and tone at a little less half way, as you see in the picture (the other at different setting is the LEVEL)...INSTANT SRV!!! but turn a little the tone and you get either a cut bassy sound or a "nails on a chalkboard" high sound...But you know, so much components for what I found to be a one trick pony...IMHO You surely can get similar sounds with simpler circuits...

[Nitefly182]

Here is a video of the magnus from above:

http://www.youtube.com/watch?v=SS-yGMF3a_0

[Sody54]

Finally getting around to doing the box art on a few of my builds.  Russian Big Muff, Rangemaster with a fat switch (makes a big difference between single coil and HB), Dr. Quack (GGG board_ build), relabel of my original issue Small Stone.  That little bit of vintage silk screening that was left is hard to get off!!!  I know the "Small Stone" font isn't right, but it's the closest I could find with a week of searching.  I think I looked at about 5000 different fonts.  They all start looking the same after a while!!!! 

All artwork is done in Adobe Illustrator and is printed on inkjet transparency film cleared with 4 coats of Krylon Crystal Clear.  Still need to put about 6 more coats on each to try and blend the edges better.

[caress]

Here is a video of the magnus from above:

http://www.youtube.com/watch?v=SS-yGMF3a_0

sounds rad

[205]

After some minor debugging it was finished:

Looks great!

Can you tell me more about this? Which circuit is it and whats the min & max delay time range like?