Pictures!

[richon]

No, its a cousin of the Tubescreamer....  same output buffer, almoust same input buffer.... no tone control, Treble cut (passive, not active like BB preamp), bassboost (passive also). Same JRC4558D 

[tiges_ tendres]

My first go at water slide decals.  I dont like water slide decals!

[guitarman89]

My first go at water slide decals.  I dont like water slide decals!

what pedal it is?

[tiges_ tendres]

My first go at water slide decals.  I dont like water slide decals!

what pedal it is?

It's an UglyFace.

[free electron]

OMG! Are you some kind of pedal building android or something? That is such a piece of work. 

I guess i just don't like fuzz boxes

Here's the finished pedal (reverse laser decal, green background)


And here's something much simpler, not very pretty but extremly useful, a low power reactive speaker load emulator i'm using with my small tube amps for silent recording. The basic concept you can find @ aikenamps. I've wound a multitap inductor for the mid/high band impedance rise. The Resonance switch allows to set the resonance peak height. There will be an isolation transformer installed for the LineOut, when i get one...

[Slade]

bbpreamp?

"Ketchup" is a very famous pedal here in Chile
Richon pedal's have a great vintage sound!

Greetings, richon!
Guess who am I!

[repente]

Hi All! Here is my effects 



And here is a big picture of the diy pedals



The next project will be a Zendrive kit  and probably an artec power supply.
Greetings!

[Br4d13y]

your graphics are awesome!!!  did you design those?

[Taylor]

Hope you don't ever decide to sell the D+ or TS.  Cloning circuits is fine, but yoinking trademarked names and logos could land you in some hot water.

[Cardboard Tube Samurai]

Hope you don't ever decide to sell the D+ or TS.  Cloning circuits is fine, but yoinking trademarked names and logos could land you in some hot water.

I was thinking the same thing

[repente]

Of course!!! I will never sell my pedals; there are like a little treasures for me .

[arma61]

Of course!!! I will never sell my pedals; there are like a little treasures for me .

+1!  specially when you draw your own layout, create your own graphics, debug them (if needed, an mostly of them need it!) oh, and the results are  beautiful just like yours are, and the 99.9% in this thread ! They become priceless 

Armando

[Kitarist]

Hi All! Here is my effects 



And here is a big picture of the diy pedals



The next project will be a Zendrive kit  and probably an artec power supply.
Greetings!

What kind of decals did you use here?

Thanks!!!

[repente]

Thanks a lot for your comments  , really these pedals, for me, are a "big" treasures because I used a lot of work's hours.
For the decals I used Fasson© Polietillene (plastic label, it looks like a vinyl) printed in digital and after I laminated it with matt plastic.
The result it's a heavy duty label but with a super-soft surface.

P.D.: Sorry for my poor level of english!   

[nicofx]

Etched Twin Tremolo.. the red/green select LED indicate the active channel






Tonepad RAT for a friend.

[Valoosj]

After a few minis, here's a maxi 

[musiclikscreams]

LEDs in the eyes = Genious!

[Projectile]

Tonepad RAT for a friend.

What did you use to get such a thick and shiny clearcoat? It looks great! Mind elaborating on your finishing process?

[nicofx]

What did you use to get such a thick and shiny clearcoat? It looks great! Mind elaborating on your finishing process?

Several coats (five at least) of Rust-Oleum Hard Hat clearcoat.. wet sanding with 1200-2000 grit in between every coat..
AND.. a whole lot of patience

[Renegadrian]

The LEDs at the eyes are great!!! Are they to show on/off or are the clipping diodes?! I wish I made mine with the clipping LEDs shown...