Pictures!

[tommy.genes]

Is the graphic Reepicheep from the Narnia books?

-- T. G. --

[phintze]

Is the graphic Reepicheep from the Narnia books?

-- T. G. --

That was my first thought...

[JKowalski]

Etched Twin Tremolo.. the red/green select LED indicate the active channel

THAT is a nicely done enclosure. Kudos!

[nosamiam]

Thanks a lot for your comments  , really these pedals, for me, are a "big" treasures because I used a lot of work's hours.
For the decals I used Fasson© Polietillene (plastic label, it looks like a vinyl) printed in digital and after I laminated it with matt plastic.
The result it's a heavy duty label but with a super-soft surface.

P.D.: Sorry for my poor level of english!   

Your English is just fine!

Those labels look great! I've got to get some of that stuff. I'm guessing you're in Europe? I'll have to try to get that stuff here in the States. I found the company, but it doesn't look like they sell to individuals, only companies.

Great work!

[Br4d13y]

Is the graphic Reepicheep from the Narnia books?

-- T. G. --

That was my first thought...

i think it's the mouse from the redwall series actually.....

[repente]

Hi Nosamiam!
I'm from Spain (Europe  ).These sheets, and the matt plastic there are only for companies 
If you want to get the same quality you can contact with a press (little print company) and ask them.
The "trick" is the matt plastic, if you print in standard adhesive but you laminate with the matt film* the finish will be superb.

*Ask for this in the press, the film must be roll tipe with heat system machine for the best results (like this http://www.abbmaquinas.com/productos/pic/plastificadoras%20bobinas-2.jpg)
The price will be less than 3-4 $ aprox. for 1 sheet. If the price is more expensive change for another print company.

A greeting!

[nicofx]

Is the graphic Reepicheep from the Narnia books?

-- T. G. --

That was my first thought...

i think it's the mouse from the redwall series actually.....

I think it's meant to be Reepicheep.. I found the sketch while browsing the net, and as soon as it appered on the screen
I knew that it would make a great RAT 

[vince76]

first painted handmade box
Have to learn but sound fantastic

V.

[Thomeeque]

first painted handmade box
Have to learn but sound fantastic
(img)
V.

Looks good! But you should shelter that tube somehow..

[Renegadrian]

Grande Vincenzo!!!
Nice pedal!!!

[vince76]

first painted handmade box
Have to learn but sound fantastic
(img)
V.

Looks good! But you should shelter that tube somehow..

I want to find something like a grid. I want to see the tube :-)

Tank you Adriano for the help too.

[MarcoMike]

I've seen some really nice looking grids for external mounting... not sure where and when...
but I remember they were quite expensive though...

EDIT: found it! at banzai's.

EDIT2: what circuit is it?? I guess a Valvecaster, if Adriano was involved...

[solderman]

Hi
Nice work. That one with the LED:s in the eye reminds me of this one I did a yer or so ago.

One eye for ON/OFF the other for channel switching

[niopren]

back


DEMO
http://www.goear.com/listen/babefc0/zw44mod-me

[The French connection]

Hi
Nice work. That one with the LED:s in the eye reminds me of this one I did a yer or so ago.

One eye for ON/OFF the other for channel switching

and this one...



Dan

[vince76]

ciao MarcoMike, where are you in italy?
Thank you for the link. too expensive but really nice.
Think one could build with a couple of washers... :-)
You're right it's a valvecaster, no tone as per adriano schem, with a 12AU7.
Happy with it.

[studiostud]

first painted handmade box
Have to learn but sound fantastic
(img)
V.

Looks good! But you should shelter that tube somehow..

I want to find something like a grid. I want to see the tube :-)

Tank you Adriano for the help too.

What about using "U" shaped bars on the sides.  Wouldn't protect if it was dropped, but should protect it at least from getting kicked and shattered. 

Like on FreqencyCenteral's signature image for example.

[frequencycentral]

first painted handmade box
Have to learn but sound fantastic
(img)
V.

Looks good! But you should shelter that tube somehow..

I want to find something like a grid. I want to see the tube :-)

Tank you Adriano for the help too.

What about using "U" shaped bars on the sides.  Wouldn't protect if it was dropped, but should protect it at least from getting kicked and shattered. 

Like on FreqencyCenteral's signature image for example.

Hey dude! That image is copyrighted! See that big black Mercedes just pulling up outside your house? See the four mean looking guys getting out of the big black Mercedes? Uh-oh.......!!

anyway.................. http://www.diystompboxes.com/smfforum/index.php?topic=71856.0

[svstee]

Man, one print mention and it all goes to your head, Rick! 

Uh-oh, now the black Mercedes is in front of my house. Boy, that thing must move fast...

[solderman]

Yes Good enough U bars are hard to find.
Like thees but then again they are not deep enough to protect the tube. I hunted around a lot before I gave up when I found those and they are NOT good enough. They are to low