Pictures!

[tiges_ tendres]

Fernando: You are blowing my mind!!!! 

[birt]

Jordan Bosstone

great!

[Mugshot]

Slade, you are a DIY god.

[jkokura]

Here are a bunch of recently completed projects!

This one is pretty obvious as to what it is. I had some help debugging from fellow forumites - thanks to one and all, especially Petemoore. It sounds really, really good to me. It's quickly joined my board. I think I'll build the mosfet version one day and then A/B them to see how they compare. That will be a great topic for discussion I think.



And the Guts.



I'm most proud of this one - BYOC makes it easy to do though. The Analog Delay is a crazy project - check out the guts shot to see the level of complexity and the parts count. However, I wired this one up today, and it fired right up! No debugging whatsover!!!! Unreal.



And the Guts.



I have some more recent finishes that I'll post when I have the pictures up on imageshack.

Jacob

[richon]

BYOC 5 Knob for myself,

excelent finish....any link to get get a tutorial on how to do it?

its just rust-oleum brand primer, hammertone and clearcoat over rub on transfers.  I could do a rub on tutorial if people are interested.

YES I AM!!!!!

waiting for it...

I just thounght of a nice FUZZ FACE with this kind of paint for some hendrix sounds!!! 

[aziltz]

ok, i'll get to work. it might take me a week or two.  i don't have any pictures of the process, step-by-step, but I'll see what I can do!

[kabi]

My Boogeyman with the new knobs, 100% finished:



Now it IS pretty close to the original Mark II design 

[Beros]

I like cloth. It's an overdrive with NOS germanium diodes and oversized caps and resistors.. 600V for a 9V circut.


Guts:

[bobp1339]

I like cloth. It's an overdrive with NOS germanium diodes and oversized caps and resistors.. 600V for a 9V circut.

You never know when you might want to add 66 more batteries to it!!!

[mr.adambeck]

Echo Tech - Delay







Regards,

Fernando.-

HOLY CRAP!  Amazing!

[glenn.b]

I just finished my BYOC Phase Royal.  It was the smoothest build yet, and it operated just perfect after plugging it in & adjusting the trim pot.  In the lounge I will post sounds clips/ vid...

[img]<a href="http://s895.photobucket.com/albums/ac158/glenndude/?action=view&current=c21e34f7.jpg" target="_blank"><img src="http://i895.photobucket.com/albums/ac158/glenndude/c21e34f7.jpg" border="0" alt="Photobucket"></a>/img]
[img]<a href="http://s895.photobucket.com/albums/ac158/glenndude/?action=view&current=02145801.jpg" target="_blank"><img src="http://i895.photobucket.com/albums/ac158/glenndude/02145801.jpg" border="0" alt="Photobucket"></a>/img]

[img]<a href="http://s895.photobucket.com/albums/ac158/glenndude/?action=view&current=3fa07a32.jpg" target="_blank"><img src="http://i895.photobucket.com/albums/ac158/glenndude/3fa07a32.jpg" border="0" alt="Photobucket"></a>/img]

[glenn.b]

/img]

[davent]

I just finished my BYOC Phase Royal.  It was the smoothest build yet, and it operated just perfect after plugging it in & adjusting the trim pot.  In the lounge I will post sounds clips/ vid...

Nice work there Glenn, i think there's a similar pair of stockings stashed around here in a safe spot.

Take care
dave

(With photobucket just grab the IMG Code   for your picture and it'll do all the work for you.)

[erix]

I always wanted to build a fuzz factory and then I remembered that big box of parts an old engineer gave me one day.
Chassis, transformer, tag strips, film cap, big-ass green light and transistors came from that box. Wire came from my friend R-Dub.
All the rest came out of my parts bins - I have too many parts!

Mojo up the wazoo! I'm getting dead quiet 9.35V from the 6.3V transformer.

Q1 is a 2N1973 w/ 158 hfe, Q2 is 2SA77 @ 60 hfe, Q3 is 2SB516 @ 103 hfe.
The germs are a little low gain but in this circuit it doesn't matter!
I'll probably tear this up and build an amp in it - one day - but for now it is a fun little distraction....
ok,
erix

[Slade]

HOLY CRAP!  Amazing!

Thanks!

I just finished my BYOC Phase Royal.  It was the smoothest build yet, and it operated just perfect after plugging it in & adjusting the trim pot.  In the lounge I will post sounds clips/ vid...

That's a really beautiful finishing. Love it!
Congrats!

[Taylor]

I always wanted to build a fuzz factory and then I remembered that big box of parts an old engineer gave me one day.
Chassis, transformer, tag strips, film cap, big-ass green light and transistors came from that box. Wire came from my friend R-Dub.
All the rest came out of my parts bins - I have too many parts!

That's hilarious, nice job.

[kabi]

My new -Version B- Dr. Boogey




It features an on/off/on switch that changes the input capacitor value between 0,33uf/none/22uf for that Raw/Vintage/Modern effect, as well as a DPDT switch that reduces the value of the Gain pot from 1M to approx. 200k

All in all, a relatively successful build (ok, i'm a little dissatisfied with the 'A/B Channel' effect but i might process it further). Also, after looking at these pics i think i'll eventually go with black knobs on this one :-)

ps. I'm feeling soooo 'small' after browsing over hunderds of pages in this thread  

[moose23]

Nice and plain:

[Renegadrian]

Please explain what those pedals are! The first looks like a super duper...

[moose23]

Please explain what those pedals are! The first looks like a super duper...

Sorry yeah, it's super duper, a mammoth and a rangemaster.