Pictures!

[igerup]

Here's my latest build. A variation of the 1978 IC Big Muff.








Perhaps not the best wiring in the world, but it sounds good. The ciruitboard is just for having some place to mount the IC sockets. It's a 4558 & an uA741. There's an extra switch to toggle between two different diode-bypass caps (as well as not having any in the circuit at all). The fourth pot is a "body" control, basically just an extra tone control. And the DC  jack is actually a 3.5 mm mono tele jack.  It made it a bit easier to get the "correct" polarity on the jack (tip +, ring - ) as opposed to the silly  center negative option.

I did notice that I too have some four digit 4558s lying around along with a bunch of film caps from the '80s & '90s so TS808, here I come! 

[Galego]

Here's my latest build. A variation of the 1978 IC Big Muff.








Perhaps not the best wiring in the world, but it sounds good. The ciruitboard is just for having some place to mount the IC sockets. It's a 4558 & an uA741. There's an extra switch to toggle between two different diode-bypass caps (as well as not having any in the circuit at all). The fourth pot is a "body" control, basically just an extra tone control. And the DC  jack is actually a 3.5 mm mono tele jack.  It made it a bit easier to get the "correct" polarity on the jack (tip +, ring - ) as opposed to the silly  center negative option.

I did notice that I too have some four digit 4558s lying around along with a bunch of film caps from the '80s & '90s so TS808, here I come! 

JEEBUS!!! I'm not knocking on your work, but damnn!!! How can you navigate around that "point-to-point" wiring? I would get lost after the first two components.

[igerup]

I learned to solder by working on tube amps. So I'm pretty used to it. It's quite nice to not getting shocked by high voltage when working on 9 volt pedals.  The noise can be a bit loud when accidentaly discharging a 500 volt cap with a screwdriver.  : icon_lol: 

[kupfer_m]

La Rosa - My forever morphing preamp.

Absolutely stunning ! Is it a low voltage design?

Beautiful tube design (as always) ! Did you use OHP transparancy film for the graphics?

[JKowalski]

You've done it again, Igerup 


...665 already?

[phector2004]

A Mojorific 808 (JRC4558 out of an early 80's Sony tape recorder)

Makes me wish I hadn't thrown that 1984 Sony tape recorder about 1 month before I got into this 
Time to scavenge for leg-warmers era electronics

oh and page 665... 

[Galego]

I have my post ready to copy paste... The antecipation is killing me. 

[trad3mark]

I have my post ready to copy paste... The antecipation is killing me. 

Patience is a virtue.

[G. Hoffman]

I have my post ready to copy paste... The antecipation is killing me. 

Patience is a virtue.

What does virtue have to do with evil?



Gabriel

[frequencycentral/Slade]

Bleating and babbling we fell on his neck with a scream.
Wave upon wave of demented avengers,
March cheerfully out of obscurity into the dream.

[Camphausen]

9V DC Supply wit 6 6 6 conectors!

[caress]

9V DC Supply wit 6 6 6 conectors!

with the 6 jacks coming out it looks more like POWER WHISKERS!

[AudioMime]

Man, that is a pedal.

[AudioMime]

9V DC Supply wit 6 6 6 conectors!

That decal is pretty cool! How did you get it?

[trad3mark]

You are all horrible sinners... Horrible, evil sinners. Your time will come.

[Galego]

You are all horrible sinners... Horrible, evil sinners. Your time will come.

yeessss... only 5 more posts to go. 

[kurtlives]

Fine I'll play into your game.

[a soBer Newt]

BOR clone. still needs knobs

sounds killer

[tuckster]

I rebuild my nurse quacky because i wanted an etched pcb. The darn thing won't work. I etched a new pcb and ordert the parts again because I couldn't find the fault after hours of searching.
The rebuild nurse wouldn't work too. Hours of searching revealed a LED IN WRONG DIRECTION!!!!!!!!!!!!!!!!!!!! AAAAAAAAAAAAAAAARGH!!!!!!!

Here are the riped out guts:







Pretty boring stuff.... I just want to push to 666


Gus your pedals are great as always!!

[marlin]

Built another NeoVibe. I suck at decals so I just used the Dymo