Pictures!

[dougman0988]

uC = microcontroller. 

[jimmybjj]

Ross compressor with wet/dry blend courtesy of Processaurus (who was very helpful and patient with me) http://www.diystompboxes.com/smfforum/index.php?topic=40292.0 and the janglebox mod on back.

[Taylor]

Rectangular hole! That deserves props all by itself.

[free electron]

Yet another compressor!
Some shots from the bench, the work is still in progress. This is my take on using the TDA7052A chip as a VCA in compressor pedal. Inspired by the Elektor article, however, the only one common thing is the use of TDA chip, i've designed it from scratch. Thanks to the input level regulator the pedal works very nice with many instruments, tried it with guitar (single coils & hot humbuckers) and a bass with passive electronics. The pcb is actually a single layer one, i have plenty of doule sided leftovers from other projects which i wanted to use. The top layer is just a ground plane with a few jumpers.
I'll post full details on this project later, when i'm back from my incoming trip.

[Hides-His-Eyes]

DIY 2 layer board? Niiice.

[edd101]

hi there!

it's been a while...
my Ross/Dyne comp with hammer mods. very sweet sounding compressor!



RossPhaser, very clean and transparent phaser, but imho Phase90 is better



...and cellphone picture from the gigroom of my EchoBase(with all the latest mods), sorry no guts I dont have this pedal anymore, miss it so much


Ed

[Steve Mavronis]

RossPhaser, very clean and transparent phaser, but imho Phase90 is better

Mmm-mm Good!

[Skruffyhound]

This forum has gone compressor crazy in the last week.
All beautiful builds on this page guys.

[metalero30]

Microamp and Microamp with loop




Rebote delay 2.6 with two channels



footswitch fs3x with a normal footswitch



dr boogie

[tasos]

rebote 2.6? is this your version?
great pedals by the way! what's up with the dr boogie toggle switch?
we want to learn more!
i just finished my fet matcher!


[in case you care!]but soon i will upload a new pedal! [tonight]
see ya!30 j201 are waiting to get matched!

[aflynt]

This is a HBOD clone built off Madbean's Yellow Shark board.




-Aaron

[tasos]

ohh!the honey bee rocks!is it a clone or a new design?
this is a wooly mamooth i made....[unfortunately i have to send it to athens ....but money is also good! a big futurlec order i awaiting! ]

[pete27]

that honeybee looks so great! love the yellow wire to match!

[ca cat]

Great builds, guys!

Couple of new ones:

A Bluebox (doooh )



Strymon fauvorite switch - controller



and a threesome with a custom power supply

[aflynt]

ohh!the honey bee rocks!is it a clone or a new design?

Thank you! It's just a clone build on a pre-etched board I got from Madbean though.

that honeybee looks so great! love the yellow wire to match!

Thanks! I think I stole the matching wire idea from someone else who posts on here (John Lyons maybe?). I got the 50' wire sampler from SmallBear and there's enough of each color to do a little more than 1 pedal.

-Aaron

[pete27]

nice, i might have to also steal that idea

ive also built that yellow shark board, its a real nice overdrive.

here is my yellow shark (the gold pedal), along with a slow loris build (the silver one):

[glops]

Craig Anderton Ring Modulator

[arma61]

Hi m8s

my latest work!
                                                                     

and its guts !

                                                                     

[tiges_ tendres]

Craig Anderton Ring Modulator

May I ask where you got the PCB for that?

[glops]

PM'ing you