Pictures!

[amptramp]

I know it's not a picture but I really wanted to share this with you all!!! too small!!!
http://www.youtube.com/watch?v=_jzGMceO_AQ

Is that an illuminated stomp switch on the small amplifier?  It looks like it has a blue ring around the top of the plunger.

[.Mike]

I already posted this in a different topic, but...

Here's a Rebote 2.5. I bought the PCB a while back as a debug project from someone here at the forum. The enclosure is from one of the blem lots that come up on here from time to time.

The simple design was inspired by the Zephyr.

[metalero30]

little angel chorus...

[elenore19]

I already posted this in a different topic, but...

Here's a Rebote 2.5. I bought the PCB a while back as a debug project from someone here at the forum. The enclosure is from one of the blem lots that come up on here from time to time.
...

Where's the porn??? (guts)
I need my fix.

[glops]

Sorry for the repost.  My pics vanished.  Had to re up them...

Thanks for all the kind words.  I really love the way it came out. I thought having an industrial look would
be fitting.

Skruffyhound and Phector2004:  Its a reverse etch without any paint added afterwards.  I just scrub the box down with
a brush to get some of the gunk out and then wetsanded to take of the toner.  Then auto hub cap clear.

snarblige: The two pots on the top are panel mounted trims I found at a surplus house...

Gristleizer again:

[snarblinge]

thanks glops, I have them in a few old amps, but wanted to use some for pedal builds, searching all over but can't find them.. grrrr.

[.Mike]

I already posted this in a different topic, but...

Here's a Rebote 2.5. I bought the PCB a while back as a debug project from someone here at the forum. The enclosure is from one of the blem lots that come up on here from time to time.
...

Where's the porn??? (guts)
I need my fix.

Heh... I didn't post guts at first because I bought the board pre-stuffed as a debug build. It was missing a resistor, and had another with a value that was way off. It took about 10 minutes to figure it out.

[tasos]

well...this is the first pedal that is actually my circuit...nothing too special a super modified mxr microamp from tonepad...i really hated it so i socketed pretty much all parts and made my changes!now it is a bass booster [yep..bassists actually use pedals!]this fattens so much...can't wait to record some clips!




http://img17.imageshack.us/i/1000066nz.jpg
http://img200.imageshack.us/i/1000093zk.jpg

the enclosure measures 75x35x30...it is actually a little smaller than the 1590a!

[Renegadrian]

yes but you cannot beat the one of the video I posted!!!

(it seems it has a illuminated button, but who knows, obviously it's not me!)

[jimmybjj]

I know its a pretty basic build (Klon Buffer) but I'm pretty proud, it being my first layout come to life. I also like that i was able to get it inside the small enclosure.


Next to a Boss for size reference

[puretube]

OK. Don't post pics that often.
A tryout, just to to see that it can be done.


and guts


And, written before, but again.
As this is an infringement on the EHX trade dress it  will not be produced and should be considered (a full functional) parody.

Hey Mr Dirk you goes the DIY from outher space!! what amazing is that!!!!!!!

Evolution ate teh kidz...



(from here:),

and here...




(as far as "parody" is concerned...) EDIT: originally buried here:

an evolution of this:



which in turn is a derivate of this:

[deadastronaut]

@puretube:

how do you do those graphics...

[1878]

Random Number Generator.

All stock apart from the '100k resistor mod' which I replaced with a 1M pot. It gave it a wider range of more generic fuzz sounds as well as the all out weirdness. I probably could've got away with a 500k.

Thanks Doug !!

[puretube]

@puretube:

how do you do those graphics...

It`s an ancient, now almost forgotten art, that I was taught almost 50 yrs ago...

[nicofx]

HAO Rust Driver clone with volume mod. From Mark M's layout. Etched to get that rusty look.

[kukac97]

HAO Rust Driver clone with volume mod. From Mark M's layout. Etched to get that rusty look.

Very nice. Could you tell me more about this etching technique?

[TamuT]

Nico, that Rust Driver looks Great! 

[ayayay!]

Nice Nico!  I like how the Volume and Gain arrows point to the knobs.  It's refreshing. 

And where did you get those awesome knobs?

Great job. 

[John Lyons]

Yes, that Rust Driver looks great!

[frequencycentral]

Nice sunny day here in rural Warwickshire, so I thought why not spend it indoors building a Superfly. This one's got a 'Brake' in place of the master volume - takes the B+ down from 190v to 110v.