AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

News:

SMF for DIYStompboxes.com!

Main Menu

Pictures!

Started by Hal, August 23, 2005, 01:58:47 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 880 881 882 883 884 885 886 887 888 889 890 ... 1503
User actions

DavenPaget

#17681
October 13, 2011, 04:08:13 AM
Quote from: bean on October 12, 2011, 08:22:01 PM
Quote from: DavenPaget on October 12, 2011, 06:11:53 PM

Lovely pedal ! What's it used for ?

Thanks Daven, it's an Electric Mistress configured for an MN3207. It's similar to the project posted here, although I did end up making a few small changes with the BBD and output stage. It sounds glorious!
Good for you ! Happy tone-ing :D
Hiatus

guitarmageddon

#17682
October 13, 2011, 10:34:40 AM
Germanium Fuzz Face with a 5-band graphic eq. :)



skullservant

#17683
October 13, 2011, 10:46:11 AM
Cool!

deadastronaut

#17684
October 13, 2011, 12:03:21 PM
^ thats the first attempt ive seen at doing slide pot holes....good on ya!... :icon_cool:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

dromilious

#17685
October 13, 2011, 05:13:15 PM
One MXR microamp booster finished today.Enjoy!!!

fretzburner

#17686
October 13, 2011, 07:19:55 PM
My new build a zendrive clone





upload tif

Mac Walker

#17687
October 13, 2011, 07:29:13 PM
Quote from: guitarmageddon on October 13, 2011, 10:34:40 AM
Germanium Fuzz Face with a 5-band graphic eq. :)


What's the op-amp close to the transistors, a buffer before or after the FF?

I've wanted to try the graphic eq style slots, I'm thinking of some sort of jig to hold the dremel steady...

guitarmageddon

#17688
October 13, 2011, 08:13:36 PM
Quote from: Mac Walker on October 13, 2011, 07:29:13 PM
Quote from: guitarmageddon on October 13, 2011, 10:34:40 AM
Germanium Fuzz Face with a 5-band graphic eq. :)


What's the op-amp close to the transistors, a buffer before or after the FF?

I've wanted to try the graphic eq style slots, I'm thinking of some sort of jig to hold the dremel steady...
Its a TC10445 to provide negative power for the FF.
Two pilot holes and a dremel would work well, I think. I only had a drill... and nothing to keep it steady ::)

phector2004

#17689
October 13, 2011, 08:44:04 PM
If you have the patience, you can make some really nice clean holes with one of those small file kits...

IF....

The slots in your pedal match the writing though, giving it a real gritty look. Love it!  :)

elenore19

#17690
October 14, 2011, 01:59:18 AM
Here's my creative light idea that I've incorporated into a couple pedals now.
Lights out of the rubber feet!

The pedal is a fuzz factory clone. Bottom of the pedal detaches via battery clips. To remove for pedal maintenance. The guts aren't that clean, but with shielded wire used and what not it works great. Just messy. I love the lights.







-Elliot

elenore19

#17691
October 14, 2011, 02:09:38 AM
Sorry for the double post...

Here are some other pedals I've had done for a while now.
No porn, sorry guys.

Rat Clone

OCD Clone

Dr. Boogie

Thomeeque

#17692
October 14, 2011, 05:32:40 AM
No porn, no glory ;)
Do you have a technical question? Please don't send private messages, use the FORUM!

Fender3D

#17693
October 14, 2011, 05:37:50 AM
Quote from: Thomeeque on October 14, 2011, 05:32:40 AM
No porn, no glory ;)

I was just saying the same to my girlfriend...

:icon_mrgreen:
"NOT FLAMMABLE" is not a challenge

LaceSensor

#17694
October 14, 2011, 11:38:32 AM
Wonders when the current lover pcb will be released :)

Renegadrian

#17695
October 14, 2011, 10:09:01 PM
Here are some of the latest...

Little Angel (the graphic is not mine!) and a SHO


DOD 250 Grey Replica and Fulltone Fat Boost


Orange Squeezer and Manson Big Muff (don't remember if I already posted it...)
Done an' workin'=Too many to mention - Tube addict!

Crowella

#17696
October 15, 2011, 12:04:20 AM Last Edit: October 15, 2011, 12:16:33 AM by Crowella
@elenore19 , that idea with the rubber feet is immensely awesome  ;D

First attempt at a clear inkjet decal. A little bit stretched. Just needs to be drilled, laquered a few times and should be good to go :) Complete with overkill caps  :)

Rhythm in jump, dancing close to you

Barcode80

#17697
October 15, 2011, 12:38:10 PM
Quote from: Crowella on October 15, 2011, 12:04:20 AM
@elenore19 , that idea with the rubber feet is immensely awesome  ;D

First attempt at a clear inkjet decal. A little bit stretched. Just needs to be drilled, laquered a few times and should be good to go :) Complete with overkill caps  :)


Nice! If you use more water on the enclosure before you place the decal, that should help it move without stretching.

nocentelli

#17698
October 16, 2011, 10:07:48 AM
Really like these new hammond trapezoid enclosures:


Quote from: kayceesqueeze on the back and never open it up again

tasos

#17699
October 16, 2011, 10:16:43 AM
Quote from: nocentelli on October 16, 2011, 10:07:48 AM
Really like these new hammond trapezoid enclosures:

Come on!Tell us more! ;)
Print
Go Up Pages 1 ... 880 881 882 883 884 885 886 887 888 889 890 ... 1503
User actions