Pictures!

[dromilious]

A point to point xotic ep booster guts...

[scuzzphut]

Here are my builds 1 and 3. (2 was , ummm.....)

First is a valvecaster.

Second is a combined Tube Screamer and Ross Compressor using Tonepad PCBs.

Lessons learned -
(1) I should have taken more time to align the icons on the valvecaster.
(2) I messed up the 8/909 text and didn't notice until it was finished ಠ_ಠ

[tasos]

8/909 were you sleeping on the keyboard?
what were you supposed to write?
Guts?

[scuzzphut]

  It switches between TS-9 mode and TS-808 mode, so it's supposed to read  9/808

[LaceSensor]

Here's my recent works. These are my first attempts at self etching, all work great first time.

First up, the Deep Blue Delay (Madbean Sea Urchin)





The Light Wah, devised by Dead Astronaut on these boards...





And lastly a GGG Dod 440. A friend bought the kit and his friend then borked the build, so I gutted and redid the board etc.
Sounds pretty neat!

[deadastronaut]

@lacesensor:   cool, nice to see another lightwah build, nice one!......

[ApAcHe*]

Here's my recent works. These are my first attempts at self etching, all work great first time.

First up, the Deep Blue Delay (Madbean Sea Urchin)

What was the product that you used to do the etching? this yellow?

[Pigyboy]

This is a SupaFuzz clone done on a vintage PCB by Pigeon FX in a sweet YY from Pedalenclosures for an auction for Children In Need.  I found a sweet sound set of 2N1305's that sound great in this circuit so whoever gets the pedal will be very happy and the money goes for a great cause. I will have more info in the next days about how to get involved in the auction.  Good on Brook from Pigeon FX for putting all of this together

[LaceSensor]

Here's my recent works. These are my first attempts at self etching, all work great first time.

First up, the Deep Blue Delay (Madbean Sea Urchin)

What was the product that you used to do the etching? this yellow?

Hmm. Ferric chloride on fibreglass copper clad board for the urchin,
Same but regular board for the other two...

[a soBer Newt]

A point to point xotic ep booster guts...

Dig it!

[dromilious]

A point to point xotic ep booster guts...

Dig it!

Sorry i didn't understand what do you mean??

[nexekho]

A point to point xotic ep booster guts...

Dig it!

Sorry i didn't understand what do you mean??

It's slang for liking it a lot.

[dromilious]

Thanks for explaining.Thank you very much!

[skullservant]

Just finished up a Madbean boarded Triangle Muff. It sounds killer! I'm really pleased with it. Putting a SHO before it really brings out some nice tones.




Also, a SHO that I built earlier in the week:

[Pigyboy]

This is a SupaFuzz clone done on a vintage PCB by Pigeon FX in a sweet YY from Pedalenclosures for an auction for Children In Need.  I found a sweet sound set of 2N1305's that sound great in this circuit so whoever gets the pedal will be very happy and the money goes for a great cause. Thanks to peps1 from Pigeon FX for putting all of this together
Here is the link to get in on the auction - 100% goes to Children In Need - Please help out & Thanks!

http://www.ebay.com/itm/280775371016?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1014wt_1398

[LaceSensor]

redid my DBD as an etch, first go, quite happy with it.

[azrael]

where would I buy red hammerite like that? Looks so cooL!

[Pigyboy]

where would I buy red hammerite like that? Looks so cooL!

^^^
That one came painted from pedalenclosures.com

[darron]

sorry it's just a pic off my phone. already posted in the mail.

the enclosure was done by Mark O'Shea and fitted with my optical tremolo guts (:

[ShortScaleMike]

Sunday was spent soldering