Pictures!

[roseblood11]

that's the new hammond 1590trpb:
http://www.uk-electronic.de/PDF/1590TRPB.pdf
http://uk-electronic.de/onlineshop/product_info.php/cPath/104_259/products_id/1965/language/en?osCsid=a0a5954edae87821508fc8255c6df71c

[Güero]

What in the  Are you using a high power opamp or a chipamp .

...that's a TDA 2003

[DavenPaget]

You used a car amplifier chip for a headphone amp 

[Galego]

Wouldn't a couple of LM386 be enough? 10W seems a bit overkill

[bean]

Finished off my 'Weener Wah' with all the mojo trimmings. The pot has a little LED in it for an indicator.

[ShortScaleMike]

I finished my DirtBagDeluxe and gave it the DMM graphics treatment with the help of my decal designer, Tim.

[Thomeeque]

You used a car amplifier chip for a headphone amp 

Why not?

[DavenPaget]

You used a car amplifier chip for a headphone amp 

Why not?

Well ... Quoted 6W into 10% Dist ... OH WELL IT'S A GUITAR HEADPHONE AMP I FORGOT 

[Thomeeque]

You used a car amplifier chip for a headphone amp 

Why not?

Well ... Quoted 6W into 10% Dist ... OH WELL IT'S A GUITAR HEADPHONE AMP I FORGOT 

Up to 4.5W @ 4Ω is quoted typical distortion 0.15%.. and you need few tens of milliwatts for very loud headphones..

[DavenPaget]

Up to 4.5W @ 4Ω is quoted typical distortion 0.15%.. and you need few tens of milliwatts for very loud headphones..

Loud when it is LOUD ... some headphones need 1W ... for no good reason . but 0.15% is ... i can't hear any distortion .
(4.5w/2 is 2.25W/ch  )
You tied both headphone outputs to the output right ?

[markeebee]

D+ into Vibracaster.  

Hee! When you push the button, the robot's tummy lights up.

Goes from Vibracaster old-schoolyness to squeeling feedbacky oscillation.

[frequencycentral]

^^^

Looks amazing Mark!

Guts, or it aint real.....

[deadastronaut]

@mark:  nice build man!....i collect robots so thats right up my street!...nice!.

[LaceSensor]

Its my take on the Ezekiel 25:17 Bass Distortion

[mattthegamer463]

Hello together,
here's my latest pedal, an authentic TS808-Clone - "TUBESCREAMER TS808 authentic".

I already posted this pedal but now it is finished, I have build a new Pertinax-pcb
and installed a switch for sym. + asym. -clipping...

The Pertinax-pcb is a little thicker, so I could not close the enclosure-cover,
but no problem - I cutted a little window  

Greetings
Magnus

I see you're trying to raise the TS-808 hype to whole new level hahaha

But what exactly do you mean by authentic? It doesn't seem any more or less authentic than the other gazillion clones everyone else has done (me included).

My first venture into smd (thanks mattthegamer463 for the push to get me into it):


It's my rework of the ISP decimator (no cmos switching and fewer ICs).

Glad to see you like it!  Sometimes it just seems like the answer.  Did I sell you a board?  Can't remember now.

[Galego]

Glad to see you like it!  Sometimes it just seems like the answer.  Did I sell you a board?  Can't remember now.

No, and it's not your layout, I think you went with the LF353s just like the original (minus the cmos switching).

[peps1]

Here is a little Mullard 0C44 RangeMaster + (3 input caps on a toggle) for the skreddy run Build classic fuzz to benefit Philippine flood victims






And love that RS unit build there markeebee!!!

[Güero]

Ibanez TS7 clone without the electronic switch ...TBP.

[markeebee]

D+ into Vibracaster.......

Guts, or it aint real.....

Oh bugger.  I was worried someone would ask about that.

Welcome to my wiring hell.....



I was going to invoke the Scruffie Clause ("the wiring is neater than it looks") but, to be honest, it's every bit as shambolic as it looks.  In my defence I added a charge pump and heater regulator on the fly.

Made even worse by the beautiful neatness of the three posts above.

[earthtonesaudio]

Ibanez TS7 clone without the electronic switch ...TBP.

Wow, first 7 series I've seen!  Did you use the schem that's available on the net (in other words, is that schematic accurate)?