Pictures!

[greeny23]

SHO and Woolly Mammoth.

[tasos]

3knob wooooly?

[Pollinator95]

No, silly. One-knob WM and three-knob SHO. 

[Arseniy]

ZVEX Box of metal clon


By radiohum at 2012-03-11[/img]

mid fi electronics clari NOT clon

[greeny23]

3knob wooooly?

booted the wool knob, just left it set on full wool.

[illcom]

I needed a small pedal board, battery powered for when I can't bring my big board
A Ross compressor (Tonepad), serendipity and a grapevine into a modded GE-7 (sniper mod), sounds great.
I once saw people fixing their stompboxes to their board with bike chain links, it turns out you can fix them to one another

Thanks Madbean for all the work you put making these layouts
(zdrive, dls)

[Maik]

Madbean´s Cave Dweller

[~arph]

The Arcade

Arpeggiating retro sounds.
Based around the PWM by Tim Escobedo.




Some sounds (not the best timed examples, but you get the idea) all reverb is coming from my amp:

http://soundcloud.com/arrfx/arcade3    -  Three layers four step, three step and 0 step modes
http://soundcloud.com/arrfx/arcade2    - Two layers

The next sample has some ticking, that's gone in the pedal (as you can hear in the examples above) This sample however shows the diffferent sounds you can do in two step mode.

http://soundcloud.com/arrfx/arkanoid    - Running through some settings.

[deadastronaut]

@maik:   are you ok?...


@arph:  nice n retro...i like that pcb purple...

[~arph]

@arph:  nice n retro...i like that pcb purple...

DorkbotPDX 

[Maik]

Hey Rob, had a fight with my wife-but it was a hard won!

[deadastronaut]

oh i see...so she threw raspberry sauce at you....

[markeebee]

~arph

That is very very cool.  Can you share the design?  Or can I buy a board from you, just for personal use? Or can i buy a semi-finished pedal? Or something?  PM me?

[~arph]

Thanks,

I'm not going to share the schematic here, but I will PM answer all questions regarding the design. I'd like to see if I can sell these if there is a nishe market.

[artifus]

hmmmm... i was just going to share some ideas of my own in this forum but am now not so sure. every man for himself. welcome to the rat race i s'pose...

is this the direction we want our collective evolution as a species to take?

are we part of the problem or part of the solution?

what sort of a world do you want to live in?

what sort of a world do you want to leave for your children?

no offence arph, i understand and sympathise, but that attitude does put me off sharing.

*edit* maybe i am too naive...

[~arph]

No offence taken.

I'm willing to provide all info, just not a a schematic and or complete project and I'm not the only one here. I want to stimulate creativity, this pedal really isn't that complicated. No uC all CMOS and a 386.  ( cmos:  4017, 4024 and 4066 ). We all share what we like and let's at least be honest about it. If this pedal gets reversed, no problem and I will assist to make sure the actual schematic that gets traced is correct. Until then you'll have to do with my pointers.

[artifus]

don't mind me, i'm just screaming into the void - it wasn't directed at anyone in particular, just the entire human race. i come here for relief from what the media tries to shove down my throat day after day and was briefly upset by your post but, as i said, i completely understand. good work dude - keep it up.

[~arph]

No problem bro   

[ca cat]

Two new ones have been born 

[Güero]