Pictures!

Al Heeley · May 18, 2012, 08:25:42 PM

Quote from: Colonel Angus on May 18, 2012, 12:25:15 PM
Can anybody link to build info for wooly mammoth? I just made our bass player a ROG Ginger and it is not fuzzy enough. Apparently I suck at searching today...

vero here...
http://tagboardeffects.blogspot.co.uk/2011/02/zvex-woolly-mammoth-vero.html

Pettol · May 20, 2012, 11:08:28 AM

Nice one there Slade. Is that reversed (inverted) etch?

My latest, but not best build - An Echo Base:

The enclosure was built from scrap. Managed to mess up the paint job a bit when assembling

. Added all mods I could find and got sloppy, so the inside is... I could show you a gut shot, but then I would have to kill you.

It sounds very nice though - thanks Slacker!

kaycee · May 20, 2012, 11:13:34 AM

Quote from: Pyr0 on May 18, 2012, 06:23:15 PM
Hi all,
ok after a few months of sourcing components, building, debuging, calibrating etc, my moosapotamus MN3007 based A/DA flanger is finally finished, and it sounds sweet.
And yes, I built it on veroboard, thanks to Harald from sabrotone. I won't ever attempt anything this complex on vero again, it's just too painful and prone to errors.

Whoa! That came out really nice! I feel your pain on the large vero builds, they are hell to debug.

kaycee · May 20, 2012, 11:17:36 AM

Phase 45 with phase/vibe switch, rate LED and 'depth' control.

Worked off of IR French's vero, sunshine yellow paint and stick on lettering.

tyzjames · May 21, 2012, 12:59:28 PM

Timmy->808->Boost->SHO

Timmy rehouse + COT50

Superduper

tasos · May 21, 2012, 01:42:29 PM

Don't give up dude!Great!

Colonel Angus · May 21, 2012, 02:49:28 PM

Nice look!!! Can we see some guts?

michelterres · May 21, 2012, 05:35:49 PM

Quote from: tyzjames on May 21, 2012, 12:59:28 PM

Timmy->808->Boost->SHO

This one is awesome \m/

mth5044 · May 21, 2012, 08:26:26 PM

Quote from: Pettol on May 20, 2012, 11:08:28 AM

The enclosure was built from scrap. Managed to mess up the paint job a bit when assembling . Added all mods I could find and got sloppy, so the inside is... I could show you a gut shot, but then I would have to kill you.

I really like this! I'd love to have one of those enclosures

petey twofinger · May 22, 2012, 01:39:02 AM

amz mosboost , easy face , tillman jfet , christine , GGG ftm . the ftm was a nightmare to paint / finish . i made every mistake one can make , and yes 2 mm of clearcoat was an UNDERSTATEMENT ... i aint lyin ! the bottom panel is drying now , after being scraped / sanded to bare metal and properly reshot .

nobodysweasel · May 22, 2012, 06:00:19 AM

Silicon Fuzz Face Clone in there. It was my first attempt at etching the case, which came out okay, but not nearly as clean as I had hoped. But, hey, it's a fuzz pedal, so it's okay to be rough around the edges.

bluebunny · May 22, 2012, 09:01:52 AM

^^^^ Fits perfectly, I'd say.

Jdansti · May 22, 2012, 11:40:51 AM

Quote from: nobodysweasel on May 22, 2012, 06:00:19 AM

Silicon Fuzz Face Clone in there. It was my first attempt at etching the case, which came out okay, but not nearly as clean as I had hoped. But, hey, it's a fuzz pedal, so it's okay to be rough around the edges.

Cool shattered effect!

Slade · May 22, 2012, 06:10:11 PM

Just a Rat.

Cheers!
Fernando.-

Earthscum · May 22, 2012, 07:54:26 PM

Fernando... you should've got intricate and hollowed out that cursor... stuff a rectangle Green LED in there and a blinker circuit.

Dig it!

kato · May 22, 2012, 08:34:56 PM

What color is that LED Fernando?

Slade · May 22, 2012, 09:29:20 PM

@Earthscum That's the concept, exactly... it only lacks the rectangle blinking led

@kato

Magnus · May 23, 2012, 10:30:04 AM

Hello,

@Slade:
I would put a small red led on the nose of the (mouse? rat?)...

Greetings
Magnus

midwayfair · May 23, 2012, 12:56:21 PM

Sigh, we've all got to build at least one eventually ... a Klon. GuitarPCB's board. It sounds okay with the drive below half and the treble at 2:00-4:00, but otherwise it's too dark for my tastes. I might change my mind after hearing it through a cranked amp, but it's not going to end up on my board anytime soon.

The Tone God · May 23, 2012, 05:36:55 PM

Sorry for the late responses.

The feedback has been really great with this product. We are really happy about it!

Quote from: puretube on May 14, 2012, 04:35:43 PM

RESPECT !

Thanks!

Quote from: tasos on May 14, 2012, 04:47:55 PM
+1
Can this be bought somewhere?

I thought the website address on the adapter would have been enough being subtle and all (

) but as puretube more directly pointed out is availible at the our store.

Quote from: roseblood11 on May 14, 2012, 05:32:10 PM
Please get a european/german distributor for that thing quick! Maybe thomann.de or musik-produktiv.de...

We are open to international dealers. We do ship worldwide as well.

Quote from: mattthegamer463 on May 14, 2012, 05:49:29 PM
TTG,

Where can I mail the blank check to?

Lol. No cheques but if you have a credit card or PayPal account you are free to send us any amount equal and above for one.

Quote from: ~arph on May 15, 2012, 08:31:42 AM
Erm. don't you have to mod the guitar for the tone/volume control, plus jack socket

As pointed you don't have to mod the guitar. You can run the cable out the hole and add a jack and/or controls. Many acoustic pickup manufactures do this with their drop in pickups. If you want to mod your guitar you can decide how you want your guitar to change. You are not forced into a particular mod arrangement. Many guitarists go the end pin jack route tough.

I do have an control box that attaches to the end pin jack providing controls and a connection jack heading out the back which is nice. It has a guide/clamp that keeps it from rotating and the controls stick out the front so its easy to reach but it doesn't interfere with the strap.

Andrew

News:

Pictures!