Pictures!

[garcho]

duh! I forget to look in profiles 

[John Lyons]

Kay Tremolo

[gulnare]

Crunchbox with various clipping/opamp selection and AB loop:





No guts, it's messy and I forgot to take a pic before the bottom went on.

[Govmnt_Lacky]

I really like the faded look on those enclosures 

[gulnare69]

That's what happens when you use coloured Envirotex on an unlevel surface

[nordicskiah]

That's what happens when you use coloured Envirotex on an unlevel surface

Coloured Envirotex?

This requires a tutorial!

[Pyr0]

That's what happens when you use coloured Envirotex on an unlevel surface

Ahhh, a happy accident. It's great when they turn out, but can be frustrating to reproduce. Nice.

[tuckster]

Crunchbox with various clipping/opamp selection and AB loop:





No guts, it's messy and I forgot to take a pic before the bottom went on.

Veeeery nice enclosure. How did you do that paint job?

[RonaldB]

Hi,
I have made a CE-2 clone on the Tonepad layout.
Since i had a set of unused MN3207 and MN3102 I put them in here.
I made some changes for powering the MN3207 and worked great.

I also like the looks of Toneczar pedals so that was my inspiration for this one.

Other mods I did was:
- Wet level pot
- Vibrato switch
- Intensatie switch (ads a 100pf in parrallel with the 47pf cap add the MN3102)
- Deep switch (changes the 0.1uf in the LFO section to a 0.068uf)
- expression pedal input for the Speed pot, (haven't tried this one out still)

Here are the results. (The guts are a little messy, a lot of wiring)

[skullservant]

Just installed the hardware and mocked up the knobs for this fuzz I'm working on for a friend. It's a Maestro FZ-1 into a Shin Ei FY2, both with power starve, blend control, and stomp switches for each to go from 100% wet to whatever the blend is set to. It was etched by the almighty DAN.



Also put this together last night. I noticed that Mascis once had a board that was just a Fuzz Factory, AD-9, Lofi Loop Junkie and a Sans Amp. So instead of just making another old Big Muff, I figured why not make something I hadn't before?? Mascis' Fuzz Factory was this very same purple!

[garcho]

@RonaldB

First of all, you have a great 80s rapper/DJ name, second where did you get that enclosure? Is it just the photography or is it an extra-deep 125-B?

[Govmnt_Lacky]

...second where did you get that enclosure? Is it just the photography or is it an extra-deep 125-B?

I believe that is the extra-deep 1590BBS 

http://www.hammondmfg.com/pdf/1590BBS.pdf

[RonaldB]

...second where did you get that enclosure? Is it just the photography or is it an extra-deep 125-B?

I believe that is the extra-deep 1590BBS 

http://www.hammondmfg.com/pdf/1590BBS.pdf

@RonaldB

First of all, you have a great 80s rapper/DJ name, second where did you get that enclosure? Is it just the photography or is it an extra-deep 125-B?

Well it's actualy an 1590C.

[gulnare]

That's what happens when you use coloured Envirotex on an unlevel surface

Coloured Envirotex?

This requires a tutorial!

Naw, just dump some PSTF pigment in and mix good. I got it from here:

http://www.amcsupplies.com.au/index.php?main_page=index&cPath=18_269

Veeeery nice enclosure. How did you do that paint job?

See above, It was meant to be smoke grey over rustguard white/cream, but it came out a bit green. I like it anyway.

[frequencycentral]

[mth5044]

Now you know you're going to have to go on about that quadcore delay

[cloudscapes]

four PT's? 

what's the feedback path like?

[Govmnt_Lacky]

Always stunning Rick!!!!  

EDIT: Just noticed.... those are SOOOOOOO 2011  At least, according to the signature on the pedals!

[cloudscapes]

TBH Rick, those would look PERFECT with metal washers for the stomps 

[frequencycentral]

Always stunning Rick!!!!  

EDIT: Just noticed.... those are SOOOOOOO 2011  At least, according to the signature on the pedals!

Long delay...