AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

News:

SMF for DIYStompboxes.com!

Main Menu

Pictures!

Started by Hal, August 23, 2005, 01:58:47 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 ... 1503
User actions

deadastronaut

#21860
May 07, 2013, 06:31:11 PM
@camphausen:    love the pigeon s.hit pedal...lol.. 8)

@pick: stunning as always.. 8)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

deadastronaut

#21861
May 07, 2013, 07:49:47 PM
ok, not a stompbox....but hey.. :)

on this box i just sanded, ironed on toner, then clearcoated....ive tried this simpler toner graphics method before but the black went grey after a while once clearcoated ::), but i have it sussed now....

i used a toothbrush to get rid of any residue/fibres which may be the cause of the 'grey' instead of 'black' ...dry...then repeat... you can be quite vigorous with it , seems to have worked nicely.

thus nice n easy graphics. ;) 8)

now to try it on colour toner.. :icon_idea:





https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

John Lyons

#21862
May 07, 2013, 08:02:14 PM Last Edit: May 07, 2013, 08:05:06 PM by John Lyons


:D :D :D :D

Oh, and....























Basic Audio Pedals
www.basicaudio.net/

Govmnt_Lacky

#21863
May 07, 2013, 08:04:48 PM
@deadastro

What grit do you sand the aluminum with just before attempting any transfers or etches? What do you go up to?
A Veteran is someone who, at one point in his or her life, wrote a blank check made payable to The United States of America
for an amount of 'up to and including my life.'

deadastronaut

#21864
May 07, 2013, 08:32:07 PM
hi greg, i always use 120-180...get that top scum off it.....keys it nicely, you can be rough as f... with it.. :)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

Mustachio

#21865
May 08, 2013, 01:15:59 AM
Wow nice pedals guys some great recent posts! I haven't posted much lately. Here's the Mutron III I Just painted with some green to gold paint with the airbrush.





"Hhhhhhhnnnnnnnnnnnnngggggggg"

TG Flatline

#21866
May 08, 2013, 02:27:28 AM
Quote from: pickdropper on May 07, 2013, 09:39:00 AM


That's just unreal! Nice one dude!!!

Processaurus

#21867
May 08, 2013, 07:00:14 AM
Quote from: deadastronaut on May 07, 2013, 07:49:47 PM
ok, not a stompbox....but hey.. :)





Woah.  What is that thing?  Is it the Sonuus converter rehoused, or did you make it?

deadastronaut

#21868
May 08, 2013, 07:37:48 AM
hi ben, nope its a midi project from a while back.

thread/vid demo.

http://www.diystompboxes.com/smfforum/index.php?topic=80030.msg909724#msg909724
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

Govmnt_Lacky

#21869
May 08, 2013, 09:34:50 AM
Quote from: deadastronaut on May 07, 2013, 08:32:07 PM
hi greg, i always use 120-180...get that top scum off it.....keys it nicely, you can be rough as f... with it.. :)

Thanks Rob!  ;)

Getting ready to etch an aluminum plate and I wanted to know a good grit to sand with to do a PnP blue transfer. I have had miserable failures in the past and want to try again.
A Veteran is someone who, at one point in his or her life, wrote a blank check made payable to The United States of America
for an amount of 'up to and including my life.'

Hexjibber

#21870
May 08, 2013, 10:21:08 AM
Quote from: Govmnt_Lacky on May 08, 2013, 09:34:50 AM
Getting ready to etch an aluminum plate and I wanted to know a good grit to sand with to do a PnP blue transfer. I have had miserable failures in the past and want to try again.

I use 400, then 800 for my etching. Have tried going all the way up to 2000 before but 400>800 works well for me. Remember to clean with alcohol after sanding before doing the transfer, very important! :)

ch1naski

#21871
May 08, 2013, 11:04:36 AM
Quote from: Mustachio on May 08, 2013, 01:15:59 AM
Wow nice pedals guys some great recent posts! I haven't posted much lately. Here's the Mutron III I Just painted with some green to gold paint with the airbrush.






maybe it's the photo, but that finish is pretty funky/unique.
Is that board self-etched? Is there a pcb layout floating around here?
Mockingbird wish me luck.

ch1naski

#21872
May 08, 2013, 11:05:46 AM
I've been thinking about using toner as labels. Now I know it works, I'm going to give it a go.
Mockingbird wish me luck.

Mustachio

#21873
May 08, 2013, 10:41:37 PM
Yup its a self etched board. Its from the Neutron PDF from RG , or the pdf of the same project at GGG.

Yeah man the paint is funky and cool , the pictures dont do it justice. It changes from gold to green depending on the angle you look at it. Looks better to the human eye then the phone camera haha.

The paint is made for lexan rc car bodys from Spaz Stix. Its pretty cool paint. I tested it on a 1950a and I think it looked better because of the smaller case closer angles. Very cool paint. I have some other stuff I'm working on that will be very cool in the way of paint jobs! I can't wait to get something done with it to show!  :icon_biggrin:
"Hhhhhhhnnnnnnnnnnnnngggggggg"

ch1naski

#21874
May 08, 2013, 11:11:07 PM
Looking forward to seeing it!
Mockingbird wish me luck.

EATyourGuitar

#21875
May 09, 2013, 12:38:02 PM




MXR distortion plus with low noise mods and diode options all on switches. I still have some PCB's left over from this project.
WWW.EATYOURGUITAR.COM <---- MY DIY STUFF

midwayfair

#21876
May 09, 2013, 06:18:58 PM
Quote from: Mustachio on May 08, 2013, 10:41:37 PM
Yup its a self etched board. Its from the Neutron PDF from RG , or the pdf of the same project at GGG.

Yeah man the paint is funky and cool , the pictures dont do it justice. It changes from gold to green depending on the angle you look at it. Looks better to the human eye then the phone camera haha.

The paint is made for lexan rc car bodys from Spaz Stix. Its pretty cool paint. I tested it on a 1950a and I think it looked better because of the smaller case closer angles. Very cool paint. I have some other stuff I'm working on that will be very cool in the way of paint jobs! I can't wait to get something done with it to show!  :icon_biggrin:

I got a 1590B from John Lyons with a similar paint job. It really does look awesome in person.
My band, Midway Fair: www.midwayfair.org. Myself's music and things I make: www.jonpattonmusic.com. DIY pedal demos: www.youtube.com/jonspatton. PCBs of my Bearhug Compressor and Cardinal Harmonic Tremolo are available from http://www.1776effects.com!

Mac Walker

#21877
May 10, 2013, 07:10:00 PM
Rosac Nu Fuzz in a DIY case.  Used 2N3904, lot's of splattery goodness....





internal shot - lower digestive tract


electricgrave

#21878
May 10, 2013, 07:59:27 PM
^^
Nice work

kaycee

#21879
May 11, 2013, 01:05:40 PM
Nice casing Mac, very retro. Good paint choice, pukka!
Print
Go Up Pages 1 ... 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 ... 1503
User actions