Pictures!

[garcho]

it's not easy being green.

Or designing logos.     No offense, but what's the first letter? C or a K? I assume the others are 'M' and 'T'. Or is it '+'?

Putting logos on pedals is part of the fun. Putting them on a picture is good for eBay, but kinda feels silly here. Nice lookin' pedals though, Guero!

[Govmnt_Lacky]

Or designing logos.     No offense, but what's the first letter? C or a K? I assume the others are 'M' and 'T'. Or is it '+'?

I "believe" it is DMT

I gather this from the copious other logo-stamped pictures that have been posted 

[Perrow]

it's not easy getting greens.

There I fixed it for you

[garcho]

Sure is easy growin' `em though! 

[artifus]

and there appears to be some really sick reflecto-pron going on here :http://www.diystompboxes.com/smfforum/index.php?topic=36392.msg916364#msg916364
what on earth is this place coming too?! 

[ch1naski]

and there appears to be some really sick reflecto-pron going on here :http://www.diystompboxes.com/smfforum/index.php?topic=36392.msg916364#msg916364
what on earth is this place coming too?!  

what bothers me most is that I see exactly what you are taking about.
Sick minds think alike?

[artifus]

http://mindbleach.org/

[garcho]

 

Well, I'm not gonna top that, but hey, back to pics of pedals...

Had a royally ravaged enclosure that I tried to salvage by giving it that "rust-punk" look. Almost got the etch to line up but apparently I measured the 'level' and 'attack' labels incorrectly. Close, but no cigar    Oh well, usually I just etch the drill guide into the enclosure. But I'm still embarrassed that I just can't seem to remeasure enough to get it right. What the hell was I doing?!       Patience!





private parts are embarrassing, as per usual...  I'll get around to shielded rewiring someday.


+1 @ Mindbleach et al.!!! Sometimes, I love people.

[Güero]

Or designing logos.     No offense, but what's the first letter? C or a K? I assume the others are 'M' and 'T'. Or is it '+'?

I "believe" it is DMT

I gather this from the copious other logo-stamped pictures that have been posted 

[arma61]

Hi! great jobs everybody!!

here... I did it another one, MEB4!! you may have seen its gust some page ago.... now it's finished... and finally convinced my friend to get rid of the blender, it does very little things with a guitar (while is almost a must with a bass, at least that's what I know!), so signal goes DynaComp, TS,Crunchbox, Rebote, Little Angel, LPB. It still need some final job to fix it on the alum. board, with a wah on the right and the Condor Cabsim on the left, fortunately that's my friend job!

oh... and I've got it hand-signed by some of the great guitar players around the world !   

Ciao

[ch1naski]

Well, I'm not gonna top that, but hey, back to pics of pedals...

Had a royally ravaged enclosure that I tried to salvage by giving it that "rust-punk" look. Almost got the etch to line up but apparently I measured the 'level' and 'attack' labels incorrectly. Close, but no cigar    Oh well, usually I just etch the drill guide into the enclosure. But I'm still embarrassed that I just can't seem to remeasure enough to get it right. What the hell was I doing?!       Patience!





private parts are embarrassing, as per usual...  I'll get around to shielded rewiring someday.


+1 @ Mindbleach et al.!!! Sometimes, I love people.

shielding is for chumps!

I must be blind, I don't see anything wrong with the etch. Great work as usual.

[ch1naski]

Hi! great jobs everybody!!

here... I did it another one, MEB4!! you may have seen its gust some page ago.... now it's finished... and finally convinced my friend to get rid of the blender, it does very little things with a guitar (while is almost a must with a bass, at least that's what I know!), so signal goes DynaComp, TS,Crunchbox, Rebote, Little Angel, LPB. It still need some final job to fix it on the alum. board, with a wah on the right and the Condor Cabsim on the left, fortunately that's my friend job!

oh... and I've got it hand-signed by some of the great guitar players around the world !  

Ciao

son of a gun. that's nice.
Is that Tommy Bolan I see?

[ch1naski]

Another meager contribution....madbean Slambox etched pcb, similar to a SHO. No gut shot, because for how small a circuit it is, my wiring is embarrassing. (it's actually one of the first circuits I built, which makes it extra ugly inside.)

[arma61]

No, 2nd from top/left ? Van Halen, first from bottom/left ? Randy Rohads... and top last on the right is Mussida, guitarplayer of PFM, Italian 70s 80s band.

[davent]

^ The player with the strat under the 'Chorus' looks like Tommy Bolin.

[THOMMO]

THOMMO: Love the aesthetics on your percolator!

Cheers Jon!  My wife has a good mind for this stuff. I told her what I was calling it and that brewed/percolator made me think of coffee. So she came up with the colours etc. It's a shame the liquid clear coat washed out the lettering.

Thommo.

[ch1naski]

Well, I'm not gonna top that, but hey, back to pics of pedals...

Had a royally ravaged enclosure that I tried to salvage by giving it that "rust-punk" look. Almost got the etch to line up but apparently I measured the 'level' and 'attack' labels incorrectly. Close, but no cigar    Oh well, usually I just etch the drill guide into the enclosure. But I'm still embarrassed that I just can't seem to remeasure enough to get it right. What the hell was I doing?!       Patience!

is that a 2sb22 tranny i see there?

[TG Flatline]

Rams head big muff, art from  an 1870 Lithograph - Octopus attack from Jules Verne's "20000 Leagues Under the Sea"

Andrew.

Wicked etch dude

[Magnus]

Hello,
nice pedals and etchings!

Nothing new from me but I replaced the pcb in my first Fuzz Face I built years ago.
I have posted the pedal here so I don't do it again, but here's the link to the galery of this pedal: Woodface

...now it has a Pertinax-PCB with Mojo-Parts  

Here's the layout: Fuzz Face with Mods

...and the pcb-file: PCB-File






Greetings
Magnus

[Focalized]

Love this one.