AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

News:

SMF for DIYStompboxes.com!

Main Menu

Pictures!

Started by Hal, August 23, 2005, 01:58:47 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 ... 1503
User actions

bluebunny

#22240
June 30, 2013, 12:28:21 PM
Quote from: Kipper4 on June 30, 2013, 10:19:14 AM
Those look great and what i aspire to BlueBunny.
Great neat work Mark and superbe graphics.
Any chance you could share the vero layout of the tube reamer?

Thanks Rich.  Happy to share my modest layouts!  Click on the thumbnail:



(Two versions: one with M2 and one without.)
  • SUPPORTER
Ohm's Law - much like Coles Law, but with less cabbage...

glops

#22241
June 30, 2013, 06:29:45 PM

Back plate

darron

#22242
July 01, 2013, 03:31:51 AM
a fuzz enclosure that I did with Shaun Klinger last year.



it's lots of layers of candy powder coating that made a deep blood red. can't see the metal bottom anymore.
Blood, Sweat & Flux. Pedals made with lasers and real wires!

Kipper4

#22243
July 01, 2013, 07:42:49 AM
Thanks Bluebunny appreciated
Ma throats as dry as an overcooked kipper.


Smoke me a Kipper. I'll be back for breakfast.

Grey Paper.
http://www.aronnelson.com/DIYFiles/up/

fretzburner

#22244
July 01, 2013, 09:03:41 AM
My first experience in label making


screen shots

midwayfair

#22245
July 01, 2013, 09:29:25 PM Last Edit: July 01, 2013, 09:31:35 PM by midwayfair
I had a fuzzy weekend!

Mossy Sloth Fuzz/OD (I just posted the build thread for this):


Orhan Fuzz -- a Ge Orpheum/Mosrite hybrid with a few tricks like a bias trimpot, smaller feedback resistor on Q2 (thanks to Luciferstrip for the tip), and an input contour switch that swaps out the input cap and pads the input in the center so it'll play nicer with humbuckers. Loud as balls, nasty, and generally out of control. Awesomesauce. I posted the layout last night.


Pushijstij Zelonij Pyrog (Fuzzy green pie) -- Green Russian muff on perfboard in a 1590A. Just because it can be done. :P Well, that and I hadn't actually soldered up a big muff before, just breadboarded it a couple times. The transistors are BC549B, so a little lower gain than the typical 5088s. It sounds a tiny bit more ragged with the low gain transistors.


A Light Fuzzy Quiche #2 -- another Whisker Biscuit on CultureJam's board with more Bone-inspired art. (A rat creature can dream, can't he?) The switch swaps out a cap in the tone stack that creates a massive lower mids boost. (That would be the "!" side.) The tone stack is the green Russian values, so more mids in general than the typical Biscuit. Also I learned that Q2 really does have to be an MPSA13 to avoid fizzy decay. I also slightly underbiased it.


Tea and Crumpets -- my build of Alex Frias's Boss T-bone trumpet fuzz. This thing is insane, and much better than when I first soldered up the board months ago now that I got the right transistor ranges. It has some really weird quirks. Besides the octaving you can get by running down the voltage, in some low-voltage settings having the guitar and attack at full produces a carrier wave that results in ring modulation. Total insanity for three knobs. The diodes are OA1160 and OA126 (for a little more raunch).
My band, Midway Fair: www.midwayfair.org. Myself's music and things I make: www.jonpattonmusic.com. DIY pedal demos: www.youtube.com/jonspatton. PCBs of my Bearhug Compressor and Cardinal Harmonic Tremolo are available from http://www.1776effects.com!

jimilee

#22246
July 01, 2013, 10:06:17 PM
Quote from: DirkM on June 28, 2013, 09:04:17 AM

laser engraved front  :icon_biggrin:


Is it wireless? There are no jacks. Hows it work? I still need to build one....

mth5044

#22247
July 01, 2013, 10:16:47 PM
Quote from: jimilee on July 01, 2013, 10:06:17 PM
Is it wireless? There are no jacks. Hows it work? I still need to build one....
There are jacks on the PCB  :icon_lol:

jimilee

#22248
July 01, 2013, 10:35:17 PM
Quote from: mth5044 on July 01, 2013, 10:16:47 PM
Quote from: jimilee on July 01, 2013, 10:06:17 PM
Is it wireless? There are no jacks. Hows it work? I still need to build one....
There are jacks on the PCB  :icon_lol:
oooohhhhh I see them now, this is such a cool project!

Govmnt_Lacky

#22249
July 02, 2013, 07:56:51 AM
Quote from: jimilee on July 01, 2013, 10:35:17 PM
oooohhhhh I see them now, this is such a cool project!

It would be even SWEETER if Dirk would help out the rest of the DIY community and share his sweet mods with the rest of us.  :-\
A Veteran is someone who, at one point in his or her life, wrote a blank check made payable to The United States of America
for an amount of 'up to and including my life.'

pickdropper

#22250
July 02, 2013, 09:41:03 AM Last Edit: July 02, 2013, 09:42:35 AM by pickdropper
Had a couple of extra screwdrivers boards, so built them up:














deadastronaut

#22251
July 02, 2013, 10:32:55 AM
beautiful...... 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)

lend me your laser.. ;D
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

pickdropper

#22252
July 02, 2013, 11:22:17 AM
Quote from: deadastronaut on July 02, 2013, 10:32:55 AM
beautiful...... 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)

lend me your laser.. ;D

I'll laser you a box if you'll etch me a box.  :-)

deadastronaut

#22253
July 02, 2013, 12:23:43 PM
that's a deal i'll definately do ... 8)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

Mac Walker

#22254
July 02, 2013, 12:34:49 PM
Quote from: mth5044 on July 01, 2013, 10:16:47 PM
Quote from: jimilee on July 01, 2013, 10:06:17 PM
Is it wireless? There are no jacks. Hows it work? I still need to build one....
There are jacks on the PCB  :icon_lol:

No, that's where the antenna plugs in.


Quote from: DirkM on June 28, 2013, 09:04:17 AM




Does this thing use license free bands, or are there special FCC licensing requirements?

lespos

#22255
July 02, 2013, 01:13:58 PM
Suhr Riot clone.





mth5044

#22256
July 02, 2013, 01:55:00 PM
Damn pickdropper. What do I have to do to get one of those plates  :icon_eek:

midwayfair

#22257
July 02, 2013, 02:14:07 PM
Quote from: mth5044 on July 02, 2013, 01:55:00 PM
Damn pickdropper. What do I have to do to get one of those plates  :icon_eek:

A pickdropper enclosure is part of one of the prizes for the 10th Anniversary Contest. ;) hint hint!
My band, Midway Fair: www.midwayfair.org. Myself's music and things I make: www.jonpattonmusic.com. DIY pedal demos: www.youtube.com/jonspatton. PCBs of my Bearhug Compressor and Cardinal Harmonic Tremolo are available from http://www.1776effects.com!

mth5044

#22258
July 02, 2013, 02:18:52 PM
Quote from: midwayfair on July 02, 2013, 02:14:07 PM
Quote from: mth5044 on July 02, 2013, 01:55:00 PM
Damn pickdropper. What do I have to do to get one of those plates  :icon_eek:

A pickdropper enclosure is part of one of the prizes for the 10th Anniversary Contest. ;) hint hint!

Good thing I'm participating then, no?  ;D

pickdropper

#22259
July 02, 2013, 02:20:34 PM
Yep, I am going to be throwing in on the contest.  Not a huge deal, but my way of saying thanks to the community.
Print
Go Up Pages 1 ... 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 ... 1503
User actions