Pictures!

[haveyouseenhim]

Nice, but one suggestion: it seems like the default configuration is that the output of one effect goes to the input of the next effect, being that the case, why not use switched jacks and make that connection internally? You could avoid having all those patch cables unless you really wanted to bypass one or plug in something else.

Só agora vi o "Alimentação Externa", és o Mika do forum música?

I think it is that way for effect order.

[Mika]

Nice, but one suggestion: it seems like the default configuration is that the output of one effect goes to the input of the next effect, being that the case, why not use switched jacks and make that connection internally? You could avoid having all those patch cables unless you really wanted to bypass one or plug in something else.

Só agora vi o "Alimentação Externa", és o Mika do forum música?

I think it is that way for effect order.

YES

[kaycee]

A stock Superfuzz on vero from IVIark's lyout. Alcohol inks and stamping for the finish.





Super-Superfuzz. Some mods mugged onto the vero layout, sort of from the Wattson Electronics published schematic. Tone is just the switch lugs on a pot. Octave is an attempt to balance between the pre and post differential amp section.

[robrhy]

heading off to a friend in japan:

What size led is that ?

[midwayfair]

What size led is that ?

It's yo mama-sized.

[Unlikekurt]

An A/B/Y pedal i made custom for a guy who wanted independent control over each amp and then a switch to engage both that defeats the individual switches.  Has isolation transformers and ground lift switches on the A & B outputs.  Wood is cherry.

[John Lyons]

Nice work! That looks great. So hard to make foil look decent inside.

[Jdansti]

+1!

[jimilee]

These are the effects that I use the most, so I thought it would be cool to build one pedal with them all. jMK big bass overdrive-> mud bunny built to green Russian specs-> haberdasher space harp-> madbean cave dweller.



Subpar video to show it works and the cool LEDs

[mth5044]

Looks cool! Those knobs on the right are great, do you have a link to where you bought them? Thanks.

[jimilee]

Looks cool! Those knobs on the right are great, do you have a link to where you bought them? Thanks.

Sean Ryan Custom he is on FB and he had a website but I don't know it right off. I know him from the byoc and madbean forums and I'm pretty sure he posts here too.

[darron]

What size led is that ?

It's yo mama-sized.

10mm. can see them across the room and glow like an amp jewel

[jimilee]

The is the Chimaera board from Rej. Felt the urge to build another one after I lost my last one. Take in all it's glory!

[midwayfair]

My recent builds ...



Madbean Stage Fright, with an incredibly dumb spelling error and an extremely cool "sweep mod". I used an LED in place of the source and drain of the JFET in the original Maestro design, in series with a 250K pot (plus the trim pot as a "lower limit") to vary the notch of the phaser. It sounds spectacular, going from really synthy sweeps in the treble range to these incredibly deep bassy rumbles. It also will get almost flangerish sounds if you move the sweep while playing, something to think about for an expression jack ...



1776 Buzz Saw (a simplified BeeBaa) -- completely nutty fuzz. I added a third mode, a "thin" bass cut mode in the center by using an on/off/on switch and soldering a cap across a couple lugs. I can't say I'm a fan of the sound of it, but I didn't have anything this rude around, so into a box with a silly graphic it goes.

[WyndBalduram]

Finished building this over the weekend for one of the dermatologists I work for.

From right to left, in order of effects chain - Engineer's Thumb Compressor, AMZ MOSFet Boost, Mad Bean Green Bean Open Source and Mad Bean Cave Dweller.  Had fun with it and learned a lot about cramming a bunch of stuff into one box.


GUTS!!!!

[Perrow]

For a dermatologist and you decided to pour acid on its "skin" 

[WyndBalduram]

Lol, funny thing is about that, Perrow, they actually keep bottles of 40% straight ferric chloride on hand to help promote blood clotting after they perform surgery - which is convenient for me! Free etchant!   

[robrhy]

What size led is that ?

It's yo mama-sized.

10mm. can see them across the room and glow like an amp jewel

Where do you get them?

[darron]

What size led is that ?

It's yo mama-sized.

10mm. can see them across the room and glow like an amp jewel

Where do you get them?

http://www.altronics.com.au/index.asp?area=item&id=Z0230

[Telvis]

TYCOBRAHE OCTAVIA GGG