Pictures!

[davent]

I've found that my practical limit is 6 pots
3 LEDs
2 quarter-inch jacks
1 3PDT foot switch
1 3PDT toggle
1 DC socket

I did that once and that's it.  

Where's the picture of that one?

It's in the 1590A thread.

Dave's first post i believe, rank beginner.

http://www.diystompboxes.com/smfforum/index.php?topic=64752.msg878282#msg878282

[vigilante397]

I've found that my practical limit is 6 pots
3 LEDs
2 quarter-inch jacks
1 3PDT foot switch
1 3PDT toggle
1 DC socket

I did that once and that's it.  

Where's the picture of that one?

It's in the 1590A thread.

Dave's first post i believe, rank beginner.

http://www.diystompboxes.com/smfforum/index.php?topic=64752.msg878282#msg878282

Further evidence that Sir Pickdropper is not human. I thought I was cool when I fit a Rebote 2.5 into a 125B instead of my usual 1590BB. Here I am in the corner eating paste again...

[digi2t]

Just finished a Schumann PLL clone for a client, unit #2.









and some eye candy....



Yes... I shall be breadboarding the Two Face this week.   

[Kyurie]

Hi! The "Tarantula!" mixer for my client-bassist is finished. The specification and design proposed by him.

The input signal is divided into three signals, two of them go to send/return sections. Any pedals can be plugged into the send/return sections and finally "dirty" signal is blended with the clean signal. So it has solved the problem of cutting the low specter of the bass signal when it goes through guitar pedals. And optionally three guitars can be plugged into this box and it becomes the floor mixer 

The preamps are + 6Db

The front panel was engraved and painted.

The PCB is laser engraved, chemically treated and soldered classically

[pickdropper]

I've found that my practical limit is 6 pots
3 LEDs
2 quarter-inch jacks
1 3PDT foot switch
1 3PDT toggle
1 DC socket

I did that once and that's it.  

Yeah, Midwayfair actually posted it and then told me about it.  It was what pulled me over here in the first place.  Glad I came.


Where's the picture of that one?

It's in the 1590A thread.

Dave's first post i believe, rank beginner.

http://www.diystompboxes.com/smfforum/index.php?topic=64752.msg878282#msg878282

[pickdropper]

Just finished a Schumann PLL clone for a client, unit #2.









and some eye candy....



Yes... I shall be breadboarding the Two Face this week.   

WOW

[pickdropper]

Kyurie, that looks great, too.

[Kyurie]

Thank you!

[mth5044]

Mid Range Boost. Basically the tone section of a Vox Super Beatle's brilliant channel between some opamps. Used the transformer from smallbear for a ~500mH inductor. Thanks to Teemuk and RG for supporting info. Guts aren't beautiful, but what are ya gonna do. This was the first project I used those small board mount alpha pots. They worked fantastically, especially with the little snap in clips. Found my old glue gun to keep the inductor in place, then went a little crazy with it.

[bluebunny]

Just finished a Schumann PLL clone for a client, unit #2.

Been offline for a couple of days and missed this one.  It looks like it came out of an old Boeing 727!      Lovely piece of work.

[Victor custom]

UV leds in action. Mutant & Mutant Head

[Govmnt_Lacky]

I'm guessing that is a Gospel/Country fusion band......   

[Victor custom]

I'm guessing that is a Gospel/Country fusion band......   

yeah, something of that kind

[Govmnt_Lacky]

I'm guessing that is a Gospel/Country fusion band......    

yeah, something of that kind

I knew it!!!!

Obviously raising money to Free Pussy Riot!  

[Mustachio]

[Govmnt_Lacky]

Is that a Ludwig Phase 2 I see photo bombing there? 

[skullservant]

Noise Ensemble

[gena_p1]

Shift Line trio: screamer, Breaking Bad delay and La Rat.
All has mod jumpers under bottom cover

[bluebunny]

Nice little trio.

[digi2t]

Is that a Ludwig Phase 2 I see photo bombing there? 

Oh yoy... I hadn't noticed that.