Pictures!

[storyboardist]

Finished up this modded Ross Compressor for a friend over the weekend. Painted it with some Krylon stone spray paint that came out nice. Feels really durable. Then the aluminum plate has water slide decal over top.





Also finished this BC108 Fuzz Face. I made the board by placing a piece of copper tape (left over from shielding a guitar) on some plastic and cut the traces out with an xacto knife. Works fine, but it's probably not something I'll do again. Just wanted to see if it'd work.

[peterg]

Fuzz Face with extras:
A500k gain pot at input
B250k tone pot
B20k sag pot to control voltage to circuit
A1m voltage feedback pot in series with the 100k voltage feedback resistor
B1m comp pot to control diode clipping at the end of the ciircuit
B1m switched oscillation pot to feed the end of the circuit back to the start

[SmoothAction]

^ Wow. Great stuff!! 

[davent]

Once again Peter, tremendous build inside and out, taking it to a whole other level. Big fan of the painted interior and matching board. All so organized and neat.

Great layout and design outside as well,  a great looking build, nicely done!
dave

[Pettol]

Love it! A design right up my alley.

[bluebunny]

Wow!     Do they also float above the floor?  

They sure do....

Ive stuck em to my feet instead of shoes now...

Now that I gotta see!   

[bluebunny]

Cool!  And very neat insides.  Is that actually a rotary switch for the OSC control?  If so, where did you get it?

[peterg]

Thanks guys.

Marc. I used a switched pot. Here's were I got it (second item):

http://www.a1parts.com/pots/index.htm

but I'm sure you can find it at the usual suppliers.

[duck_arse]

that's fantastic.

[deadastronaut]

+1 nice n tidy too..

[karbomusic]

That Fuzz above is something to behold. Humbled and taking notes as I type this!

Latest revisions of me overdrive... I realized that really thin waterslide decals make great screens.

[deadastronaut]

pobra gato...meeeow..

[steveyraff]

Heres another from me. First time Bass Pedal build. Just boxed it up tonight. Based on the Acoustic 360 Preamp Fuzz Channel as used by Jaco Pastorius, apparently. Apologies for being a little scruffy here and there - still a relative noob.

[karbomusic]

Love the Jaco hat!

[steveyraff]

Love the Jaco hat!

Thanks. 

[Crowella]

That Fuzz above is something to behold. Humbled and taking notes as I type this!

Latest revisions of me overdrive... I realized that really thin waterslide decals make great screens.

I really like that use of the the waterslide decals on the board.

Very tidy builds. 

[glops]

Fuzz Face with extras:
A500k gain pot at input
B250k tone pot
B20k sag pot to control voltage to circuit
A1m voltage feedback pot in series with the 100k voltage feedback resistor
B1m comp pot to control diode clipping at the end of the ciircuit
B1m switched oscillation pot to feed the end of the circuit back to the start

Looks fantastic!

[Fender3D]

They sure do....

Ive stuck em to my feet instead of shoes now...

Like this??

[Frances Rhodes]

(sorry for the poor quality, i don't have a camera, these are phone pictures!)
no guts shot for the moment, but i can take one if requested

cheers

frances

requested. a brave looking layout.

then here you are, sir!

messy guts (i ripped everything off of the previous stripboard which wasn't making any sound at all and kept every wire the same size so some became too long and others too short... but anyways)


and point-to-point board


thanks for the nice comments, hopefully i'll have something a little bit more interesting soon!

[Govmnt_Lacky]

B1m switched oscillation pot to feed the end of the circuit back to the start

That 1MB Oscillation pot looks suspiciously like a small rotary switch 

Is that a PCB mount pot with the leads bent?