AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

Dr Boogey ... debugged and great !

Started by MartyMart, January 26, 2006, 03:20:03 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 4 5
User actions

Scruffie

#60
December 29, 2010, 03:00:16 PM Last Edit: December 29, 2010, 03:03:56 PM by Scruffie
Quote from: deadastronaut on December 29, 2010, 02:55:37 PM
Quote from: Scruffie on December 29, 2010, 02:27:20 PM
And I can't verify it unless someone makes me a PCB and even then, think i'm outta a few parts for now.

i'll make ya one, seeing as you didnt get anything for xmas..as a present ok.. :icon_wink:

itll give you time to get the bits....btw what size trimmers will it need?...
;D Thankk youuu  ;)

Yeah that's true, for the inline trimmers, i'd use the cermet ones at the bottom of this page - http://www.bitsbox.co.uk/resistors/presets.html
or http://www.doctortweek.co.uk/shop/catalog/browse?shop_param=shop_overview_pager%3D2%26cid%3D34%26

For the Tone Knob Trimmer, Me personally i'm gunna stick fixed resistors in its place but you need one of those Square Horizontal type or the type futurlec stock - http://www.futurlec.com/PotTrim.shtml

I could and might alter the layout to allow for other trims though... if there's space.

Edit: Futurlec Stock Both Kinds needed http://www.futurlec.com/PotRect.shtml

meffcio

#61
December 29, 2010, 03:05:24 PM
Quote from: deadastronaut on December 29, 2010, 01:48:13 PM
i cant make my pcb's till 5th/6thjanuary till my secretary (girlfriend) gets off her backside and goes back to work..where a lazer printer awaits her return... :icon_wink:
Almost same as me. I don't own a (imma firin mah) lazer printer, so my dad prints pcb at work, but now he's on vacation.

deadastronaut

#62
December 29, 2010, 03:23:54 PM
yeah id go with the bitbox multiturns i think...

id have a full size pot for the tone too....just for instant tweakability....



@mefficio..yeah id love my own lazer printer....but when someone can do it for you for nothing....great!.. :icon_mrgreen:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

#63
December 29, 2010, 11:03:49 PM
hahahah! very funny reasons! :)
"To live is to die"

deadastronaut

#64
January 04, 2011, 02:49:32 PM Last Edit: January 04, 2011, 05:33:31 PM by deadastronaut
hi guys, i ripped meffcio's nice pdf...very smooth and detailed graphic and duplicated it on A4...ready to print at 100%

@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..

edit: removed, the pcb was too large......i'll try again. :icon_rolleyes:



https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

#65
January 05, 2011, 05:37:17 AM
Quote from: deadastronaut on January 04, 2011, 02:49:32 PM
hi guys, i ripped meffcio's nice pdf...very smooth and detailed graphic and duplicated it on A4...ready to print at 100%

@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..

edit: removed, the pcb was too large......i'll try again. :icon_rolleyes:




GO GO GO ROB
"To live is to die"

deadastronaut

#66
January 05, 2011, 07:18:34 AM
Quote from: askwho69 on January 05, 2011, 05:37:17 AM
Quote from: deadastronaut on January 04, 2011, 02:49:32 PM
hi guys, i ripped meffcio's nice pdf...very smooth and detailed graphic and duplicated it on A4...ready to print at 100%

@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..

edit: removed, the pcb was too large......i'll try again. :icon_rolleyes:




GO GO GO ROB


i will i will i will...... :P
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

meffcio

#67
January 07, 2011, 06:28:23 PM
Quote from: deadastronaut on January 04, 2011, 02:49:32 PM
@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..
No, I don't, it's even more simple than you think ;)
He made the layout in ExpressPCB, so I 'printed' it to PDF using ExpressPCB + PDFCreator from http://www.pdfforge.org/pdfcreator
The same way works for most of the software, excluding DIY Layout Creator. (shame...)

Scruffie

#68
January 07, 2011, 06:29:51 PM
Quote from: meffcio on January 07, 2011, 06:28:23 PM
Quote from: deadastronaut on January 04, 2011, 02:49:32 PM
@meffcio, how did you get scruffies pcb layout to cleanup that good?..very sharp...are you using inkscape?..
No, I don't, it's even more simple than you think ;)
He made the layout in ExpressPCB, so I 'printed' it to PDF using ExpressPCB + PDFCreator from http://www.pdfforge.org/pdfcreator
The same way works for most of the software, excluding DIY Layout Creator. (shame...)
Sweet! I'll use this in future, does it just come out correctly sized then?

meffcio

#69
January 07, 2011, 06:45:46 PM
Quote from: Scruffie on January 07, 2011, 06:29:51 PM
Sweet! I'll use this in future, does it just come out correctly sized then?
It should, if you click adobe reader or other software to print without scaling.

deadastronaut

#70
January 08, 2011, 06:49:35 AM
ahhh...cool. cheers meffcio!...

https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

#71
January 08, 2011, 10:39:44 AM
Rob hows is it :))  :icon_biggrin: :icon_evil: :icon_idea: :icon_lol: :icon_mrgreen: :icon_question: :icon_surprised: :icon_rolleyes: :icon_twisted:
"To live is to die"

deadastronaut

#72
January 08, 2011, 12:27:53 PM
Quote from: askwho69 on January 08, 2011, 10:39:44 AM
Rob hows is it :))  :icon_biggrin: :icon_evil: :icon_idea: :icon_lol: :icon_mrgreen: :icon_question: :icon_surprised: :icon_rolleyes: :icon_twisted:

erm....not built yet!.....just made the pcbs..drilled n done...

i'm going to wait till scruffie gets his pcb and verifies/builds it....im sure h'ell give us a build report ...soonish... ;)
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

#73
January 09, 2011, 05:12:23 AM
ohh thats nice of you rob! nice job~ :icon_evil:
"To live is to die"

Scruffie

#74
January 09, 2011, 02:11:57 PM
I anticipate it'll sound like a Dr.Boogey... in a 1590B  :-*

deadastronaut

#75
January 09, 2011, 02:21:02 PM
Quote from: Scruffie on January 09, 2011, 02:11:57 PM
I anticipate it'll sound like a Dr.Boogey... in a 1590B  :-*

oh no!.....arghhhhhhhhhhhhhhhhh.... :icon_mrgreen:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

askwho69

#76
January 09, 2011, 11:13:38 PM
this gonna be kick ass! save $ in enclosure and less in wiring.. i hate wiring pots! hehehe it will be best if it is on board pot :)
"To live is to die"

Scruffie

#77
January 09, 2011, 11:39:58 PM
Quote from: askwho69 on January 09, 2011, 11:13:38 PM
this gonna be kick ass! save $ in enclosure and less in wiring.. i hate wiring pots! hehehe it will be best if it is on board pot :)
That's the plan!  :)

I hate pot wiring too... And mounting floating boards.

askwho69

#78
January 10, 2011, 11:09:44 PM
 Yeah :) \m/ horns up
"To live is to die"

askwho69

#79
January 30, 2011, 08:54:06 AM
What happend to this  :icon_question: i was waiting foe this :D
"To live is to die"
Print
Go Up Pages 1 2 3 4 5
User actions