Phozer Vero Build Question (Newbie)

[walkerdata]

Hey guys!  This is my first post - please be gentle.  I have a question about the Phozer vero layout from Torchy.  The schematic is from www.runoffgroove.com.  In the highlighted portion below, is this right?  The legend says C4 is 100nf.  Should it be 100uf?  I'm not good enough (yet) at reading schematics, so any help would be appreciated. 


Thanks,

Steve

[burnt fingers]

I'm not 100% sure but I think that should be a 22uf electrolytic cap.  I don't know if modifications were made to the circuit for this layout but on the schem it should be 22uf

Scott

[walkerdata]

Thanks Scott.  I will proceed with the C4 change to 22uf.  If you see anything else that may be wrong, please let me know!

Steve