Hi Cut mod for Boss DD3 ....

[Gil]

Any schematics ? Directions ?

Thanks !!

[oldschoolanalog]

The info you want is in the search function. Search "DD high cut mod.". 12th post or so down. Basiclly, put a .1uf cap across the outer 2 lugs of the f'back pot. Hope this helps a bit.

[tommy.genes]

A more direct link...

with info on both the high cut and feedback loop mods for the DD3

-- T. G. --

[Gil]

Thanks.

One strange thing that I noticed is that the newer model (the one I have, Taiwanese, with the square delay chip) doesn't make any effect when the voltage fed into it is not accurate. My previous, japanese one, didn't do that. Was sounding much better as well.