AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

"FetFuzz" schem and mp3

Started by MartyMart, January 25, 2007, 09:36:36 AM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

MartyMart

#20
January 26, 2007, 01:53:21 PM
Quote from: tcobretti on January 26, 2007, 12:57:34 PM
Marty, I hadn't seen a layout so I put that one together. 

I haven't built this, but what supplies the distortion for this circuit?  It seems like the j201 boosts the signal into the mpsa13 when then distorts because of all the diodes.  I'm wondering if a pot between the two transistors might be another good way to wire in a gain control?

Thanks for drawing that up, yes as I said above a 100k like on the fetzer vol pot
between fet and BJT base should work well  :D

MM.
"Success is the ability to go from one failure to another with no loss of enthusiasm"
My Website www.martinlister.com

tcobretti

#21
January 26, 2007, 02:05:48 PM
Sorry Marty, I misread your post.  I'll shut up now.

MartyMart

#22
January 26, 2007, 02:20:34 PM
Quote from: tcobretti on January 26, 2007, 02:05:48 PM
Sorry Marty, I misread your post.  I'll shut up now.

No no ... suggestions and layouts are ALWAYS welcome  :D :D

MM
"Success is the ability to go from one failure to another with no loss of enthusiasm"
My Website www.martinlister.com
Print
Go Up Pages 1 2
User actions