Is there a layout available for Doug Hammond Highway 89?

[luap77]

Hi all,

Doug Hammond was kind enough to e-mail me a copy of the schematic for his medium gain distortion "Highway 89". I believe that of few here have built this pedal as Doug has distributed his schematic through e-mail upon request.

Does anybody have a layout/pcb trace for this that they could post here or PM to me please? I'm hoping to build this pedal, but would love to do it with a layout as opposed to on perfboard.

Thank you kindly.

Paul E

 

[luap77]

Oh...if you do post a layout here, please don't actually put the component values on...just perhaps R1, C1 etc corresponding to the schematic.

It is my understanding that this circuit is not to be openly posted and that Doug can be contacted for the schematic.

I very much wish to respect this fact, so please don't post a layout that would allow the pedal to be built without having to go through Doug for the schematic.

So basically, I have the standard schematic from Doug and am looking for a layout to suit.

Thanks again.

Paul E

[Antero]

Voila!

http://www.home-wrecker.com/highway89.html

[markm]

Oh...if you do post a layout here, please don't actually put the component values on...just perhaps R1, C1 etc corresponding to the schematic.

I don't know if this is neccessarily true.
I e-mailed Doug H just yesterday about posting my PCB layout without component values for this very reason and he rejected the idea, asking me to point out the perf layout on Homewrecker to people who request a layout for this circuit. 
What to do if you don't build perf?
So, my understanding is DO NOT post a layout of this circuit.

[John Lyons]

Hmmm

Well...doug made the circuit adaptation but if you drew up your own layout there's nothing wrong with posting it.
If doug's not ok with it that's kind of a bummer though...

John

[markm]

I was kind of bummed about it but, I will honor Doug's request not to post it.
There are many whom don't layout their own circuits and don't build on perfboard but, I understand Doug's side of it as well.

[Doug_H]

I don't care if you guys want to post a pcb (without component values) to supplement the runoffgroove perf layout. I had assumed you had another perf layout. I don't see the point in posting multiple perf layouts if one exists as that just gets confusing.

[John Lyons]

Oh, ok... a misunderstanding...
Post away Mark!

John

[Tubebass]

I'd like to see this too!