Let's see those pedalboards!!

[AS74]

Started with the Green Ringer
Used the PushMe PullYou, liked this one.
Now onto the Dunlop Octavio. So far so good.

[Thomeeque]

 Hello!

Yesterday was my first pedalboard born (50cm, 4.2Kg, healthful )!









It should be temporary only until I finish something bigger (some pedals are not even mine), but I've started to like it immediately a lot

Bit more pics & info here..

Cheers, T.

[cab42]

Is it just wire insulation on pot shafts on the bakery pedal? In any case it looks cool.

Regards

Carsten

[Thomeeque]

Is it just wire insulation on pot shafts on the bakery pedal? In any case it looks cool.

Regards

Carsten

Hi Carsten! Yes, it's a heat-shrink tubing and it's called knob socks! Thanks! T.

[lil PopTart kid]

Ok so after my last band folded (amicably) i had no need for a pedalboard of this http://i111.photobucket.com/albums/n121/knealebrown/IMG_0226.jpg size so i got the beers in formed a plan and heres my results.

The 1590a box is a stratoblaster i use as a pre amp, the orange one is a orange squeezer and the large red one is a modded trotski drive. The TS9 i use as lead and is in a loop with the phaser, delay and tremolo this means i only have the wah, pre amp, comp and Reverb inline for clean signals. Im also using jack ormans super buffer after the 'verb but it wouldn't fit on the board.
The board itself is homemade from an old guitar case

Would you be willing to sell your old one?

[jacobyjd]

I figure it's about time I toss my latest pedalboard revamp into this thread. I was playing around with my new phone's camera, and some pics came out ok (for a camera phone...):

http://i.imgur.com/eAeKu.jpg

http://i.imgur.com/YFOEc.jpg

aaand, one for clarity:

http://i.imgur.com/4xVp3.jpg

Bottom row, right to left: Amp switch/AB box > Polytune > Black Finger Tube Comp > Gristleizer > Holy Grail Nano > BMP w/ Ge diodes and AMZ presence control > Hot Silicon Fuzz > OHS (I didn't have a 5kC, so a 5kA wired backwarf would have to do...hence the name)

All that goes into the Sansamp into my 30w combo, and the DD-20 is in the FX loop.

*edit* linked since I can't resize the pics easily

[phector2004]

how's the polytune? worth it?

[jacobyjd]

how's the polytune? worth it?

For me, absolutely, especially in the band I do lead vocals in. It's much faster for figuring out which strings are off in the middle of a performance, when I don't really have much time to look down at my board.

Some people like to whine that it's not accurate enough. To that, the only real response I have is that the guitar is a massively flawed instrument when it comes to intonation. If your open string is off by an almost-imperceptible amount because of your tuner, and you can't compensate with your hands, you should practice more.

It is a bit slower than other tuners I've used on individual string mode, but for me, the poly mode more than makes up for it.

[Stimpy]

Well, here's my board. Nothing too unusual. I like the case. I started with an old small piece of luggage. I replaced the hinges with breakaways and the latches with some scavenged big old things. I wired up a "boxless" foot-switched master volume. Note: Once I used this set up for a while I removed the metal bar shown in the pic that operates the master volume and PQ-3B pedal simultaneously. I found that I can press both at once without it. That way I get another gain setting as well by engaging the EQ without the master volume. That may make sense to some of you... BTW, I really like the way it all sounds.



http://www.glowfoto.com/static_image/02-171705L/6937/jpg/09/2010/img5/glowfoto

Here's the list in signal path order.

Squire Deluxe Strat
Boss PQ-3B Parametric EQ (yes, it's supposedly a bass pedal...)
Boss PN-2 Tremolo
Boss EH-2 Enhancer
Tube Works - 'Real Tube' Overdrive (12AU7 used in place of 12AX7)
Behringer PH9 Phase Shifter
Behringer DC9 Compressor
Master Volume Footswitch
Peavey Classic 30

Stimpy

[FiveseveN]

Since this got bumped, I'll throw in my update:


(click for full size)

Effects (in the approximate order of the signal path):
Behringer Hellbabe Wah
JFET booster
Si Fuzz Face
Anderton Comparator Fuzz
Dr. Boogey (tweaked and sans tonestack)
Sound JS CE-5 Stereo Chorus
Digitech Death Metal
Behinger V-amp 2
Guyatone PS-026 Bass EQ (hidden in the box)
Harmonic Converger Workalike (also hidden)
Headphone poweramp and PSU, obviously.

The green stompswitches are temporary
More details and pics at Indefinite Pitch.

[jmwreck]

[ianmgull]

The latest incarnation:

[I like Grunge]

Hey Guys
Here's my Board







The Black Box is a MXR Zakk Wylde and the White one is a Big Muff.

[boog]

main board; all stock. (sorry, cell phone pics)



tu2 -> ns2 (loop start) -> whammy -> ge7 -> NYC muff -> synth wha -> smallstone -> electric mistress -> ns2 (loop end) -> DD20

diy board; in fx loop of main board



what-the-fuzz (offboard) -> skreddy mayo with boost (orange box) -> crybaby (modded with TB and a couple other tricks) -> gargletron -> BMP 1977 opamp -> BMP violet ram -> BMP ram's head -> OCD -> black russian with tone mod/bypass -> duende/amz mini boost dual -> BYOC tremelo -> BYOC phaser -> killswitch (momentary)

the amp switch between the two i modded from a digital randall (5 pin) to an analog (TRS) since i have an older head

[blooze_man]

My latest board. I got the design for it from this video.

http://www.youtube.com/watch?v=IZcuwAYfa2Q

Guitar goes into a Tonepad Wah and from there...

Row 1: Fish and Chips, Rangemaster(silicon), Green Ringer, Trotsky Drive with BMP tone control

Row 2: Big Muff, Whisker Biscuit, Little Angel Chorus, Tuner.





Blue LEDs...

[ckyvick]

Top from right to left:whammy iv, crybaby 535q wah, box of metal, danelectro tuner, behringer uo300, boss rc-2, and modded metal zone.
Top row of the board right to left: snow white into causality 4 phaser, atoner, tap tempo tremolo, 7k phaser fleur, stage 3(modded fetzer)
Bottom- sliqfuzz(1kf), 7of9 phase 90 vibe, byoc analog delay, A boost waiting to be picked up, and the byoc esv fuzz(germ). next to that is a dual tap box i made for the rc-2

[trad3mark]

hahaha ckyvick your board needs moar knobs! lol! looks awesome though!

here's mine as of today:



Peavey Rotor EX with GFS Crunchy Rails (Guitar) > Digitech Whammy 4 > ohnoho's Blowing Up > EHX Big Muff Pi (w/Tone+Wicker) > eighty seven percent Cannon (Germ Big Muff) > eighty seven percent SnapToGrid (feedback loop) + Behringer FX600 on Delay > Korg MiniKP > Vox AD30VT

I'm working on 2 other pedals to add to it at the moment. one called De Stijl, which is a simulator of a Silvertone 1485, and the other is called HyperArchitecture, which is based on a Fuzz Factory, except with more gain, and doesn't oscilate. It's a really fun board to play on. I only got the Blowing Up today, and it's super loud fun! Worth every cent of the $100. Plus, it's got a @#$%ing dinosaur on the front!

[aflynt]

My PedalBoard.

Signal Chain:
1. Vox Wha (original reissue version w/true bypass and DC Power mods).
2. Gizmo Overdrive (based on Son of Screamer circuit).
3. Fried Chicken Fuzztone / Range Boost (Fuzz Face w/bias control + RangeMaster w/3 way input cap selector).
4. Cyborg Rat (rehoused mid 90s RAT 2 w/Reutz mod on pot).
5. Boss CE-2 (w/clickless true bypass mod and LM833N replacement op amp).
6. Uniphase Phase Shifter / Impulse Tremolo (mid 90s reissue Phase 90 w/univibe cap selector mod, script mod, and rate indicator mod + EA Tremolo built on guitarpcb board).
7. MXR Carbon Copy (stock).
8. TC Electronic Polytune (stock).



Link to large version:
http://www.aaronflynt.com/wp-content/uploads/2010/11/IMG_0218.jpg

[jkokura]

Redid my board today...



Signal Chain is:

Guitar > POG > CS-2 > Hartman Fuzz > JMKlon > Volume Pedal > Empress Tremolo > CE-3 > DD-5 > RV-3 > Jamman Solo > Fender Vibro Champ

Jacob

[Beros]

Functional. Makes rigging fast..