Let's see those pedalboards!!

Started by DanielWong, January 04, 2008, 11:42:19 PM

Previous topic - Next topic

stallik


Right to left. tuner, Vox Valvetone, Rehoused CS3 Compressor, Zendrive clone with SHO, SuperDeep (2 mayqueens - 1 a bit special - see separate post), PT80 with tap tempo. I usually have a modified Morley Bad horsie wah at the beginning
Board is a simple piece of acrylic suspended on screw in posts from the parts bin at Ikea, illuminated with a single red LED at the top left.
Powered by a single 1.5amp PS I built years ago and is as quiet as a mouse even daisy chaining the effects
Insanity: doing the same thing over and over again and expecting different results. Albert Einstein

bluebunny

^^ Nice family shot - even with the two imposters on the right!   :icon_biggrin:
  • SUPPORTER
Ohm's Law - much like Coles Law, but with less cabbage...

slacker

#622
Very nice, I like the invisible board.

Here's mine in it's latest incarnation, decided to put the TS9 back on after a couple of years of not using it.



Taniwha Fuzz >> Super Vixen fuzz >> soft/hard clipping OD/Distortion thing >> TS9 >> tailz looper (top right) in the loop Babelfish >> FV-1 based multifx thing (the orange pedal) >> DD3 >> Echo Base then after the loop Cathedral >> RC2 >> TU2

pastorjustinb

"If you fall in a bottomless pit you die of starvation." TGS

Rethfing


roseblood11

Wow, that looks great!
What's the name of that font with the swashes?

Rethfing

Its called "Brannboll Fet" on www.dafont.com :) You get different swashes depends on which number you put at the end.

arma61

hI

though, unfortunately, it's not mine... it's loaded with one of my builds  8)  8)  8) .... the red one on the bottom... but... best of all.... it's on stage!!! ready for a show... this is the reward I like most!!!   8)  8)  8)







"it's a matter of objectives. If you don't know where you want to go, any direction is about as good as any other." R.G. Keen

fretzburner


digi2t

Finished putting it back together after the move.

  • SUPPORTER
Dead End FX
http://www.deadendfx.com/

Asian Icemen rise again...
http://www.soundclick.com/bands/default.cfm?bandID=903467

"My ears don't distinguish good from great.  It's a blessing, really." EBK

haveyouseenhim

You have a swirled JEM?!?!?   What's your address? What's your work schedule? Do you have a dog?
  • SUPPORTER
http://www.youtube.com/haveyouseenhim89

I'm sorry sir, we only have the regular ohms.

digi2t

Quote from: haveyouseenhim on July 21, 2013, 10:28:56 PM
You have a swirled JEM?!?!?   What's your address? What's your work schedule? Do you have a dog?

I have a gun, I have a shovel, and an alibi.

That's worked fine for me so far. Just ask my daughter. :icon_mrgreen:
  • SUPPORTER
Dead End FX
http://www.deadendfx.com/

Asian Icemen rise again...
http://www.soundclick.com/bands/default.cfm?bandID=903467

"My ears don't distinguish good from great.  It's a blessing, really." EBK

haveyouseenhim

Good answer :icon_lol:

I absolutely love swirled JEMs.   Where'd you get it?
  • SUPPORTER
http://www.youtube.com/haveyouseenhim89

I'm sorry sir, we only have the regular ohms.

digi2t

Quote from: haveyouseenhim on July 21, 2013, 10:54:45 PM
Good answer :icon_lol:

I absolutely love swirled JEMs.   Where'd you get it?

Bought a machined body, and swirled it myself. It replaced the body of my RG570. Other mods were Motherbucker pups + coil cuts, rails single in the middle, treble bleed mod, multi color Sperzel locking tuners (to match the swirl colors), and JEM knobs.

Swirling it was a pain, lots of trial and error. I finally got it just right, and I will never do another one, ever again. Never. BLA! :icon_lol:

  • SUPPORTER
Dead End FX
http://www.deadendfx.com/

Asian Icemen rise again...
http://www.soundclick.com/bands/default.cfm?bandID=903467

"My ears don't distinguish good from great.  It's a blessing, really." EBK

haveyouseenhim

Do you have a closer picture of it?  I'm sorry, I have always wanted a JEM. My dream guitar.  Here's me swirling my RG470.

  • SUPPORTER
http://www.youtube.com/haveyouseenhim89

I'm sorry sir, we only have the regular ohms.

Hexjibber

Finished the line up for my DIY (Ikea Gorm shelf) board, broke it out for a gig at the weekend and was feeling very chuffed with myself! :)

(Top row l-r: Phase 45, Multiplex Echo Machine, Madbean Double Flush, Micro POG, D*A*M Meathead Deluxe, Harmonic Percolator. Bottom row l-r: Boss TU-2, Trace Elliot Trident footswitch, Big Muff)


TG Flatline

Quote from: Hexjibber on July 22, 2013, 04:39:38 AM
Finished the line up for my DIY (Ikea Gorm shelf) board, broke it out for a gig at the weekend and was feeling very chuffed with myself! :)

(Top row l-r: Phase 45, Multiplex Echo Machine, Madbean Double Flush, Micro POG, D*A*M Meathead Deluxe, Harmonic Percolator. Bottom row l-r: Boss TU-2, Trace Elliot Trident footswitch, Big Muff)



Sweet board dude! :)

Focalized

I've had and built over 100 pedals and have never had a pedal board put together. What up with that?

haveyouseenhim

Quote from: Focalized on July 22, 2013, 05:32:37 AM
I've had and built over 100 pedals and have never had a pedal board put together. What up with that?

Same here. I have made and owned tons of pedals, but never made a proper board. I just play in my room so there's really no need for it. I just choose the effects I want for that session and set them up on the floor.
  • SUPPORTER
http://www.youtube.com/haveyouseenhim89

I'm sorry sir, we only have the regular ohms.

Focalized

I know what you mean. I haven't played in a band situation since high school when I had two pedals.  A Metal Zone, a Ibanez phaser and also a Art rackmout multi FX I used for delay. Maybe a wah a few times. I need a gig somehow, now.