Show me your 1590A enclosures/pedals...

[rocklander]

compare the prize...

yep.. heaps better price.. I suspect for me shipping to NZ would balance that out though.. and I usually buy at least 10 per time, so it's only 50% more expensive for me...   they really are pretty good jacks. much better build than the cheaper futurlec ones I've tried.. very happy with them :-)

[deadastronaut]

thats cheating, you have to use 24mm pots and massive jack sockets, and a huge 12mm dc socket too in a 1590a or it doesn't qualify.........by law!..

[rocklander]

thats cheating, you have to use 24mm pots and massive jack sockets, and a huge 12mm dc socket too in a 1590a or it doesn't qualify.........by law!..

and NO SMD!

[Perrow]

and NO SMD!

...and at least two tubes.

[bluebunny]

Here's the slightly naked LPB-1 that I managed to grab back off my tame guitarist for a short while:



No guts to speak of...    Had some shorting problems, so it's mostly taped up inside!

[Perrow]

Here's the slightly naked LPB-1 that I managed to grab back off my tame guitarist for a short while:



No guts to speak of...    Had some shorting problems, so it's mostly taped up inside!

Here's my layout for the LPB-1 with on board pot. The pot is supposed to go on the component side.



And the transfer.

[frequencycentral]

.

[Renegadrian]

.

[Earthscum]

_

[rocklander]

if this thread is going to have ascii only pics it's going to take a long time to show gutshots

[deadastronaut]

[move][move][move][move]<0>  <0>[/move][/move][/move]

[arma61]

.

_

.- = A

[Slade]

.

100101001011101001010011010100100101010!!!

[Renegadrian]

Here's my first effort!

[tasos]

That's @#$%in bad!

(Lol don't tell them let them realise it!)

[Slade]

My second 1590A... It's a Bajaman's Sonic Stump. I just shrinked Madbean's Bloviator layout (yeah, I had to put a resistor on the traces side, use a couple more jumpers and put the 10M input resistor in the switch, but anyway, it worked perfectly!)







And its guts!



Thanks a lot to Brian (Madbean) for the effort on the layout I just shrinked, it was very hard to shrink since Brian did a great layout for the pedal.

Cheers!

[rocklander]

that is an uh-may-zing finish....

[darron]

wow!

[rousejeremy]

After spending a whole day trying to make a design, failing at the toner transfer 5 times and having my etch turn out like a complete piece of sh*t I see this. 

[tasos]

Isn't the sonic stump best stompbox ever?