AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

Show me your 1590A enclosures/pedals...

Started by andrew_k, January 29, 2008, 09:42:28 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 32 33 34 35 36 37 38 39 40 41 42 ... 138
User actions

Insanekane

#720
April 14, 2011, 03:55:30 AM
And then there was a modded sho.
I was afraid for those really thin cracking lines, but gladly they turned out just fine.



blooze_man

#721
April 14, 2011, 05:05:31 AM
Nice, man. I dig the way you do your PCB's
Big Muff, Trotsky Drive, Little Angel, Valvecaster, Whisker Biscuit, Smash Drive, Green Ringer, Fuzz Face, Rangemaster, LPB1, Bazz Fuss/Buzz Box, Radioshack Fuzz, Blue Box, Fuzzrite, Tonepad Wah, EH Pulsar, NPN Tonebender, Torn's Peaker...

deadastronaut

#722
April 14, 2011, 05:28:32 AM
@insanne... that bear is great..nice pcbs too... 8)

yeah,its amazing how detailed you can go with an etch, as long as the original image is some sort of vector graphic etc...no rough edges etc..(unless you want em).. :icon_cool:

https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

Insanekane

#723
April 14, 2011, 05:45:05 AM
Thanks  :D
Yeah, you can get really detailed graphics with etching but it takes lots of work too.
Prepping, designing and painting takes hours and it really sucks when you have a new really cool circuit that you just can't wait to test it out.

deadastronaut

#724
April 14, 2011, 05:51:35 AM
patience is a virtue...yeah know what ya mean.. :icon_wink:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

PereatMundus

#725
April 14, 2011, 12:33:54 PM
@Insanekane

Really love your work. great attention to detail and loads of visual refinement :)

-
*shameless plug:
Help me decide in what order to build theese 1590A projects
-
Guitars: Westone Prestige 150 - Aria Pro II CS-400BnG
Amps: 5150 - SloClone
Fx: 20+ DIY (100+)
Play: Kraut/Death/Industrial/Noise
Pereat Mundus Et Furia Tempo-Leena Krohn/Schopenhauer

Insanekane

#726
April 14, 2011, 01:52:24 PM
Quote from: PereatMundus on April 14, 2011, 12:33:54 PM
@Insanekane

Really love your work. great attention to detail and loads of visual refinement :)

-
*shameless plug:
Help me decide in what order to build theese 1590A projects
-

Thank you,

*Do a Zendrive  ;)

guitarmageddon

#727
April 15, 2011, 10:48:14 PM
Geez, you guys really do beautiful graphics/finishes :icon_mrgreen:
Here's a couple of 1590As I've done recently.

The "sMIrkin' gheRKIN FUZZ"



...and a Rat, both on vero.


arma61

#728
April 18, 2011, 09:43:08 AM


Hi m8s

just an "easy" one, a SHO. Not sure about the knob, I have the same in Blue, and the usual black chickenhead and Boss stile (silver in the centre), what do you think ?, is that yellow in line with the graphics ?



 



"it's a matter of objectives. If you don't know where you want to go, any direction is about as good as any other." R.G. Keen

Joecool85

#729
April 18, 2011, 12:48:29 PM
Quote from: arma61 on April 18, 2011, 09:43:08 AM


Hi m8s

just an "easy" one, a SHO. Not sure about the knob, I have the same in Blue, and the usual black chickenhead and Boss stile (silver in the centre), what do you think ?, is that yellow in line with the graphics ?

Love it.  What circuit is it?
Life is what you make it.
https://www.ssguitar.com

arma61

#730
April 18, 2011, 01:08:26 PM
"it's a matter of objectives. If you don't know where you want to go, any direction is about as good as any other." R.G. Keen

guitarmageddon

#731
April 21, 2011, 01:01:37 AM
The Gnome Bender, a Si Tone Bender.



earthtonesaudio

#732
April 21, 2011, 10:58:33 AM
Quote from: guitarmageddon on April 21, 2011, 01:01:37 AM
The Gnome Bender, a Si Tone Bender.



I love this pic!

deadastronaut

#733
April 21, 2011, 11:21:03 AM
me too....i love these little buggers!...still havent braved it to make one yet though!.. :P

nice work guys... :icon_cool:
https://www.youtube.com/user/100roberthenry
https://deadastronaut.wixsite.com/effects

chasm reverb/tremshifter/faze filter/abductor II delay/timestream reverb/dreamtime delay/skinwalker hi gain dist/black triangle OD/ nano drums/space patrol fuzz//

arma61

#734
April 21, 2011, 12:04:08 PM


you should! nice candidate for your tiny tremoloooooooooooooooooooooo!

Ciao
"it's a matter of objectives. If you don't know where you want to go, any direction is about as good as any other." R.G. Keen

tasos

#735
April 24, 2011, 05:04:40 PM Last Edit: April 24, 2011, 05:06:59 PM by tasos
this is my exact post on the pictures thread! ;D this enclosure is smaller than the 1590a [i can't get hammond] so i think it belongs here! ;)

well...this is the first pedal that is actually my circuit...nothing too special a super modified mxr microamp from tonepad...i really hated it so i socketed pretty much all parts and made my changes!now it is a bass booster [yep..bassists actually use pedals!]this fattens so much...can't wait to record some clips! ;D




http://img17.imageshack.us/img17/1760/1000066nz.jpg

http://img200.imageshack.us/img200/2549/1000093zk.jpg

the enclosure measures 75x35x30 while the 1590a measures 92x37x30 ;D

size matters.... :icon_eek:

nocentelli

#736
April 30, 2011, 07:12:29 AM
Here's my latest effort - A Bigfoot FX Magnavibe vibrato pedal clone:


Quote from: kayceesqueeze on the back and never open it up again

davent

#737
May 04, 2011, 03:41:02 PM
Apparently there can never be too many SHO's  in "A's"...  another. Made a pair of boards quite awhile ago, one with a 2N7000 and one with a BS170. Boxed the 2N7000 back when i finished the boards but only  got to finishing up the BS170 last night.






dave
"If you always do what you always did- you always get what you always got." - Unknown
https://chrome.google.com/webstore/detail/photobucket-hotlink-fix/kegnjbncdcliihbemealioapbifiaedg

tasos

#738
May 04, 2011, 04:26:05 PM
Quote from: davent on May 04, 2011, 03:41:02 PM




the finish is stunning!
what's up with the nut of he switch?is it flat on the down side or i just need a good sleep? ;D

blooze_man

#739
May 04, 2011, 04:43:54 PM
I just woke up and there is definitely a flat side.
Big Muff, Trotsky Drive, Little Angel, Valvecaster, Whisker Biscuit, Smash Drive, Green Ringer, Fuzz Face, Rangemaster, LPB1, Bazz Fuss/Buzz Box, Radioshack Fuzz, Blue Box, Fuzzrite, Tonepad Wah, EH Pulsar, NPN Tonebender, Torn's Peaker...
Print
Go Up Pages 1 ... 32 33 34 35 36 37 38 39 40 41 42 ... 138
User actions