Question about L.A Boutique Screamer schematic

[Painkiller]

I've been wanting to build the BB preamp, and I have been told that the L.A Boutique Screamer is supposed to be a good copy of that. But today when I was ordering parts, I noticed that two of the resistors on the schematic are labeled "47E" and "220E". I understand the rest of the labeling, but what does this mean?

Here is a link to the schematic: http://folk.ntnu.no/espenta/gitar/BB%20Preamp/L.A.BoutiqueScreamer.pdf

[burnt fingers]

Looking at a regular TS schematic i'd say the values are 220ohms and 47ohms.  I've never seen it notated like that before.  I'm used to seeng it notated with and R such as "220r"

Scott

[kusi]

hi,

"E" is for "ohm", so "47E" is 47 Ohm. "E" means "Einheiten" (german)

btw; be sure that you connect the non-inv. and the inv.input of the gain-stage in the correct way - i made  a mistake in the drawning.


regards, kusi / drawner of the schematic

[Painkiller]

Ah, thank you! Then I ordered the right parts

I'm not sure what you mean with the mistake? Which of the gain stages are wrong?

[Painkiller]

Do you mean the first gain stage, where you have 4,5V connected to the negative input?

[Painkiller]

I have changed the schematic to what I think is correct:

http://folk.ntnu.no/espenta/gitar/BB%20Preamp/L.A.BoutiqueScreamer.png

Could anyone verify this?

[Painkiller]

"kusi" verified that the last schem is correct. I will start building as soon as I get the parts.

btw, is there an edit button on this forum? Couldn't find one...