Attn: Payback v1.1 Errors

[The Tone God]

Hello everyone,

I just realized that the schematic published on my site for Payback v1.1 has some major errors. The errors involve the pin numbers of the 4093 IC. The part library I used in creating the schematic has a mislabelled set of pins on the 4093 so the pins on the schematic do not match what the actually part pin numbers are. It is my fault that I did not check the pinouts myself before publishing. I apologize for the trouble this has cause.

To correct the errors reverse pins 8 and 10 and pins 4 and 6.

I'll publish a corrected schematic later.

Andrew

[Valoosj]

Don't forget about who found out ;-)

[Auke Haarsma]

I just realized...

Don't forget about who found out ;-)

exactly! Valoosj and Aad put a lot of effort in figuring out this error on the schematic. I also encountered most likely this error a couple of months back when I breadboarded the payback (not recognizing the error though).

Yorick gozer, je doorzettingsvermogen wordt beloond!