AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

MI Audio Crunch Box Layout

Started by mattpas, March 06, 2008, 07:24:34 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

mattpas

March 06, 2008, 07:24:34 AM
Anyone have an MI Audio Crunch Box layout?
I love the pedal and would love to make one and try some mods to it.

mattpas

#4
March 06, 2008, 08:31:28 AM
Quote from: Auke Haarsma on March 06, 2008, 08:06:48 AM
it's in the gallery...

http://www.aronnelson.com/gallery/main.php/v/MarkMs-Gallery/album15/album76/Crunch_d_Box_LAYOUT_001.gif.html

Thanks!
Is there any more info on where the LED would go?
Can I run the LED positive to the DC Jack and use a 4K7 resistor in between them?
Also, would the solder pad all the way over to the left be the ground from the DC jack?

Auke Haarsma

#5
March 06, 2008, 08:50:49 AM
Top left is ground indeed.

Status-LED can be added as you described. Just connect it to the footswitch.

Good luck!

mattpas

#6
March 06, 2008, 09:49:15 AM
hey guys,
Can you look at this and tell me if it is correct or what needs to be changed?

John Lyons

#7
March 06, 2008, 10:24:36 AM
That looks correct.

john

Basic Audio Pedals
www.basicaudio.net/

mattpas

#8
March 06, 2008, 10:29:19 AM
Anyone know where I can get a PCB made?

mattpas

#9
March 06, 2008, 12:07:18 PM
I updated the layout.
I realized the bottom right lug on the 3PDT switch can go to the board.

mattpas

#10
March 08, 2008, 06:38:10 PM
Has anyone tried this to see if it works?
Print
Go Up Pages1
User actions