AMZ FX ANALOG ALCHEMY GEOFX MEF ROG DIY WIKI

GGG ITS8 first build

Started by pfindeis, June 16, 2008, 11:03:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

pfindeis

June 16, 2008, 11:03:06 PM
My first build. I've modded alot so i decided to stay with a kit. GGG's ITS8 screamer.
Problem is it shorts out with the jacks in the box (no bypass and no effect). Works fine with the jacks out of the box. I looked and looked scratched my head and looked some more.
Can you good folks have a look?

http://s43.photobucket.com/albums/e351/vtwin1000/art%20sgx/ITS8/

Thanks, Pete

petemoore

#1
June 16, 2008, 11:32:45 PM
Works fine with the jacks out of the box.
  Ring/sleeve turned around ?
Convention creates following, following creates convention.

pfindeis

#2
June 17, 2008, 02:18:05 PM
Quote from: petemoore on June 16, 2008, 11:32:45 PM
Works fine with the jacks out of the box.
  Ring/sleeve turned around ?


I do believe the jacks are wired correctly.

jayp5150

#3
June 17, 2008, 10:42:50 PM
Are the jacks grounding something out when you plug a cord into them?

petemoore

#4
June 17, 2008, 11:38:48 PM
  The debugging thread...
Convention creates following, following creates convention.

pfindeis

#5
June 18, 2008, 05:59:32 AM
Quote from: petemoore on June 17, 2008, 11:38:48 PM
  The debugging thread...
Fixed.
no debugging needed.
the out put jack is drilled so close to the edge of the box it will short out if the jack is turned the right (or wrong) way.

tyru007

#6
June 18, 2008, 09:14:15 AM
I built the same box (ITS8) from GGG.  Noted the same thing when installing the plugs.  The tabs have a chance of hitting the case depending on thier orientation.  I'm going to replace them with some insulated jacks.
Print
Go Up Pages1
User actions