A DIY midicontroller footswitch for POD

[bengt]

http://www.youtube.com/watch?v=mkLEU4sypo8
It is based on midicontroll and MCU.
I have designed some usefull and special functions.
The beginning and ending shows some of my DIY projects.

[Auke Haarsma]

Nice project! Do you have some gutshots?

[demonstar]

WOW, good project you've got there!

[jongwong]

nice job.    

[bengt]

sorry,what does "gutshot" mean?
inner pictures?  see the two links below.
http://i.namipan.com/files/266dfd8b8c72c00a4b14c61ce46d3b5f308656f926ef01001768/0/10.jpg
http://i.namipan.com/files/f31789fb9d552d247d2a84824f2dc1db0fcf1de0bfb10000f377/0/14.jpg

This is a TS9 clone with FuWa painted by myself.
http://i.namipan.com/files/e0533743840d0afbce5d33a159a57daf0f04559a9e49010094e8/0/14%20%E5%A5%A5%E8%BF%90%E7%A6%8F%E5%A8%83%E6%89%8B%E7%BB%98%E7%89%88TS9ss.jpg
I am from Beijing China,   I 'm not sure you can get the links above.
Beijing welcome you !!  hahahaha

[bengt]

nice job.    

long time no see, We met everywhere hehe!

[any]

beautifull! 

You might try to post it on vettaville.com as well, loads of podxt users there that would love to see this!

cheers

[GREEN FUZ]

Very impressive. Good work.

[Carlos]

Here's a nice DIY project utilizing ST6220:

http://us.geocities.com/sciutta/


You can also download the "firmware"!

Regards

Carlos

[bengt]

beautifull! 

You might try to post it on vettaville.com as well, loads of podxt users there that would love to see this!

cheers

Thank you for the information.

[bengt]

Here's a nice DIY project utilizing ST6220:

http://us.geocities.com/sciutta/


You can also download the "firmware"!

Regards

Carlos

Good!  I have been thinking about using MCU with USB interface, and make a little software running in PC, and let people change the function by themselves, but this abit difficult and I dont have too much time.