Anyone Want to try and Verify My First Attempt at A Vero Layout?

[Evad Nomenclature]

Hey guys.

I have been mucking about making the Electra Distortion Circuit (since it was one of the easiest builds to start with!)
I changed a couple values of some stuff (in guesswork and using my ears) and used some mods that people have posted on the site. (Aron, Marc, plus made use a mod schem. from Alex Palmer)
So here's my attempt at a vero layout for what I came up with.  I probably screwed at least 1 thing up, but tell me if it looks o.k?



Thanks muchos! ^_^

[Zben3129]

Could you link to the schematic? Can't seem to find it.

Zach

[Evad Nomenclature]

I couldn't find it right away but it's on this forum...
here's the repost from Alex... I took away the bias control added Marc's really simple tone control... everything else is for the most part the same except for a couple of part subs.

[earthtonesaudio]

Snip that wire from the middle lug of the gain pot to make it like the schematic...
Or, leave out the cap and it will work as a more "crackle-prone" gain control.