PTAP: PT2399 tap tempo control

[RicoRokkaRolla]

I have no chip, but I have the documents:
http://www.sendspace.com/file/500hgp

...and see this topic on pages 2 and 3! There's some pix and images.

[stumper1]

Thank you!!!!!!!!!!!!!   

[jkokura]

Does anyone have the PTAP2 and PTAPH documents?

Jacob

[DirkM]

There is a new alternative project:
http://blog.dimehead.de/2010/09/pt2399-tap-tempo-modul-step-your-time/

or
http://uk-electronic.de/onlineshop/product_info.php/products_id/1797
http://uk-electronic.de/onlineshop/product_info.php/products_id/1789

[studiostud]

Sweet.  Sure wish I could read german! 

[DirkM]

http://translate.google.de/translate?u=http%3A%2F%2Fblog.dimehead.de%2F2010%2F09%2Fpt2399-tap-tempo-modul-step-your-time%2F&sl=de&tl=en&hl=&ie=UTF-8 

not the best translation, but understandable   

[tomtom1384@yahoo.fr]

Hello,
I'm french so sorry for my bad english    

I built the tonepad rebote 2.5 delay and I want to add a tap tempo and I've seen this one

http://uk-electronic.de/onlineshop/product_info.php/cPath/105_195/products_id/1797?osCsid=ae89c6ac1c796e6e23034a9539488cce

Someone has tried it ? And especially does it work with the rebote ?  

Thank you for your help.

[DirkM]

Yes it works very well in the rebote 2.5 and mostly all other circuits with one PT2399 chip 

[tomtom1384@yahoo.fr]

Great, thanks a lot for your answer.
I will order today. 
Bye

[quad]

Sorry to bump and old thread, but I couldn't find an answer to my question. Okay, so here's the deal: I'd like to add a tap tempo switch to the "Rebote Delay 2.5". These guys sell the kits:

http://uk-electronic.de/onlineshop/product_info.php/cPath/105_195/products_id/1797?osCsid=ae89c6ac1c796e6e23034a9539488cce

If you click on the manual, there's the brown wire labeled "point delay3". Where is this one suppose to be connected at? On top of that, do I just connect the green/yellow/GND wires directly to the time pot on my Rebote?

[deadastronaut]

on this link it says brown to pin 6....

http://www.uk-electronic.de/Download/Beschreibung%20Tap%20TempoSMD.pdf

[quad]

Cheers, thank you! Anyway, I suppose I have to leave out the -1K resistor to pin6- part. There's one already in the PCB, going to pin 6.