Si Fuzz Face Project ?

[musiclikscreams]

so i'm workin on the GGG si fuzz face.  i want to us a pot instead of the 1k trimmer pot so that i can adjust it w/o havin to open it up... how would i wire up the lugs?

[Kearns892]

With out looking at the schematic I would guess you're talking about the bias. Look up on the wiki or FAQ and it will show how to wire a pot as a variable resistor.

[Curly]

fyi, it's a 10K trimmer

[musiclikscreams]

shoot it is 10k... thats what i get for not double checking

i'm doin the Si fuzz face found here: http://www.generalguitargadgets.com/index.php?option=com_content&task=view&id=101&Itemid=26

[Mugshot]

shoot it is 10k... thats what i get for not double checking

i'm doin the Si fuzz face found here: http://www.generalguitargadgets.com/index.php?option=com_content&task=view&id=101&Itemid=26

try 20K pots

[petemoore]

how would i wire up the lugs?
  I would put a *4k7 on an outside potlug of *10k linear pot.
  then wire the other side of the 4k7 / wiper of pot as collector resistor [adjustable between ~4k7 and ~14k7]...depending on the *R and *VR tolerances].
  That generally accomodates misbias on both sides of the pot with a pretty good spread of 'good bais' options, making it easy to find/locate the sweet spots.