Has anyone tried this pef layout?

[DUY1337GUITAR]

Has anyone tried the Dr. Boogey layout by Xavier?  It says verified but I haven't found anyone else that tried it.  I just need to be sure because I only have enough parts to try one more time to make the Dr. Boogey.

Here's Xavier's from the gallery


And the expanded version by Krinor, I might be using this one


Thanks guys

[oldrocker]

I would also like to know if any of these layouts has been verified.

[DUY1337GUITAR]

I'm gonna go ahead and try to analyze the original schem and this perf to double check while waiting for answers 

[DUY1337GUITAR]

I would also like to know if any of these layouts has been verified.

I was working on my Dr. Boogey and got it to work!  Definitely verified.  I used the expanded perf version by Krinor because I have the exact smallbear perf size.  Fits great with conflict when using cermet trimpots.  Everything worked at first try too, no debugging, just a lot of time figuring out the trimpot settings without a multimeter...

I got mine to sound nice with lots of gainy distortion when I scoop the mids.  But I think I can make it better, but if I go any farther the hum will get worst.  THERE'S TOO MUCH HUHMMM.  The high brightness blue LED also raises the hum, too, but I think it might mostly be the power adapter that I have.  There's no info that it's regulated or not.  Also, I get a weird screechy sound when I put it on bypass (for some reason the bypass is not working either.  No sound from guitar, even though the wiring is correct on the 3PDT, I think there might be a problem with the switch...)

I'm gonna try to figure things out tomorrow morning but I don't know where to start....

[DUY1337GUITAR]

amazing... I found a piece of paper of info on my 9v power adapter inside the box that held it.  It says unregulated...
sigh...

[oldrocker]

You could make that unregulated PS a regulated one.  I did that with a 12v adaptor following Tonepads project using a 317.  The only thing is you would have re-house the transformer assembly.  On the upside the DC bridge rectifier is already there.  Just a thought.

[Xavier]

It works, I tell you  ..........just be careful with your wiring.