Fuzz Factory Kit

[chi_boy]

KILL KILL KILL!  

Fuzzer,  I pretty confident that John's comment is sarcastically aimed at the other forum members, not you. 


Are you new to building?  Is so, you may do better trying a kit from GGG.  They are well established kits and there is a lot of support to be had here.

http://www.generalguitargadgets.com/


Good luck and have fun!

Cheers,
George

[Fuzzer]

KILL KILL KILL!  

Fuzzer,  I pretty confident that John's comment is sarcastically aimed at the other forum members, not you. 


Are you new to building?  Is so, you may do better trying a kit from GGG.  They are well established kits and there is a lot of support to be had here.

http://www.generalguitargadgets.com/


Good luck and have fun!

Cheers,
George

Thank you George, I have a little bit of skill, enought for stompboxes !
I take a look at GGG

Buh bye
Ray

[frank_p]

Je pense que tu peux commencer avec un gain comme la rangemaster au premier transistor et ajuster le gain des deux autre comme une Fuzz Face.  Certains disent qu'il y a les gains à respecter et d'autres disent que c'est plus gratifiant d'expérimenter.  Tu peux aller comparer avec la Tonebender aussi, les deux circuits sont assez semblables.  Utilise la fonction "search" avec ces trois effets: il y a une quantité industrielle d'infos à ramasser.

Est tu allé voir sur le site de GEO ?  Il y a des trucs pour calibrer les tensions de la Fuzz Face et de la Rangemaster.  C'est un bon point par ou commencer pour débuter à creuser.

Tu peux lire l'anglais assez bien ?

PS: met une petite note en note de pied comme ça les gens vont comprendre que tu travaille ton anglais. 

À+

[John Lyons]

KILL KILL KILL! 
Fuzzer,  I pretty confident that John's comment is sarcastically aimed at the other forum members, not you.

Yes, my comment was aimed at the mob mentality of everyone ganging up on you.
No offense meant. Welcome to the forum! Quite a welcome I'm sure 

John

[MoltenVoltage]

svp permettez-moi de vous diriger vers le fil "burst box"...

http://www.diystompboxes.com/smfforum/index.php?topic=76932.0

vous trouverez la majorité de personnes ici pour avoir un bon sens de l'humour

bien que certaines des plaisanteries pourraient obtenir le "lost in translation"

à la vôtre!


http://babelfish.yahoo.com/translate_txt

[frank_p]

I have a feeling that there's often a feeling of "not being part of the gang" when newcomers arrive: the jokes can be seen sometimes as a kind of snobism.  But the impression disappears pretty fast once you get hooked on the fun that everybody shares.

[anchovie]

I have a feeling that there's often a feeling of "not being part of the gang" when newcomers arrive: the jokes can be seen sometimes as a kind of snobism.

You could always translate the entire Burst Box thread into French! 

[connie_c]

I was 100% sure this was spam. Im going to go look in my gmail account for all those diamond mine shares I rejected from my friends in Nigeria. What have I done!!!

[GREEN FUZ]

Hi
regarding the xenophobic comments along the line of :

Nah! I heard they were made in Chinese sweatshops , by two year olds

I think we should keep politics, racism and macro-economics out of the forum.

Although many people on this forum are from countries where working conditions are far better than the USA, I can't recall many comments refering to factories in the USA as sweat shops.  Thanks for being more reasonable in the future.
cheers

Brett, sweatshops can be found throughout the world , including, historically speaking, the USA and the UK. I referred to Chinese ones - for purely satirical effect - when I could just aswell have substituted Malaysia,India,Vietnam, Taiwan or any other country where it is known that workers, many of them underaged, are exploited. I apologise if I caused any offence but that was not my intention. I can assure you, I am neither Racist nor Xenophobic.
I take on board your comments about keeping certain subjects off the forum. I believe there is a diverse range of Cultures represented here and what might seem a throwaway comment to one person might be mortally offensive to another. I will endeavour, in future, to be more considerate in regard to any possible offence caused by an ill-considered post. Bearing this in mind, you may want to reconsider your use of tag. Quoting one of the most infamous Mass-murderers of the 20th Century might be deemed insensitive in some quarters.

[~arph]

My apologies for starting this thread off a bit hostile..

We've seen advertisers before and to me this looked like one.
Item on canadian ebay, canadian member, first post. Stating it's a fuzz factory, though it does not say that in the aution. I just thought the odds were against him.

Intersted to hear if anyone get it and builds it.

[frank_p]

I have a feeling that there's often a feeling of "not being part of the gang" when newcomers arrive: the jokes can be seen sometimes as a kind of snobism.

You could always translate the entire Burst Box thread into French!  

I am not sure it would be a worthwile piece of work.  But hey !, if you want charm a lady I can type you a couple of poetic letters...