transformer help

trixdropd · October 22, 2009, 02:12:34 PM

A friend of mine has a behringer fcb1010 midi controller in which the power transformer has died. These are the specs:

Power Transformer
Model: ED 21917
Pri.:115V~60Hz (Blk/Blue)
Sec.:10V~0.3A(Yel./Yel.)
For 965-10893-17691
Made in China

That is everything letter for letter that it says on top of the transformer.

The thing measures are as follows: 1-5/8" long x 1-1/4" (At the buldge of the wires coming out the sides.) x 1-5/16" tall.

Can anyone give me a link to a perfect replacement. I've been to mouser and i think i've found a hammond that is suitable, but mouser overwhelms me sometimes with their sheer volume of stuff...

Thanks!!

alanlan · October 22, 2009, 02:55:14 PM

Have you contacted Behringer?

Always the best place to start. Also, is it still under warranty?

trixdropd · October 22, 2009, 03:19:30 PM

Quote from: alanlan on October 22, 2009, 02:55:14 PM
Have you contacted Behringer?

Always the best place to start. Also, is it still under warranty?

He has a email to behringer that is yet to be responded to. It's not under warranty.

rustypinto · October 22, 2009, 03:22:04 PM

Sounds like you are on the right track.

The sea of transformers online is much more overwhelming. I've done the Mouser swim many times and its probably the best place to find a replacement. Just make sure you reference the datasheet to the orderable part number. I've been misled before by the Mouser description.

trixdropd · October 23, 2009, 06:12:00 PM

I'm still looking for a link. the transformer i found was too tall...anyone??

mac · October 24, 2009, 02:10:44 AM

QuoteMade in China

mac

ryanuk · October 24, 2009, 08:11:43 AM

Quote from: trixdropd on October 22, 2009, 02:12:34 PM
A friend of mine has a behringer fcb1010 midi controller in which the power transformer has died. These are the specs:

Power Transformer
Model: ED 21917
Pri.:115V~60Hz (Blk/Blue)
Sec.:10V~0.3A(Yel./Yel.)
For 965-10893-17691
Made in China

That is everything letter for letter that it says on top of the transformer.

The thing measures are as follows: 1-5/8" long x 1-1/4" (At the buldge of the wires coming out the sides.) x 1-5/16" tall.

Can anyone give me a link to a perfect replacement. I've been to mouser and i think i've found a hammond that is suitable, but mouser overwhelms me sometimes with their sheer volume of stuff...

Thanks!!

trixdropd

Not sure if this is xformer you found on mouser but its the one I woudl go for...
http://gb.mouser.com/ProductDetail/Hammond/161GA10/?qs=sGAEpiMZZMv4oUrzpPKU3GW7pSR3PqIpC4hJIY%2fbw4M%3d

RyUK

trixdropd · October 24, 2009, 04:24:46 PM

Quote from: ryanuk on October 24, 2009, 08:11:43 AM
Quote from: trixdropd on October 22, 2009, 02:12:34 PM
A friend of mine has a behringer fcb1010 midi controller in which the power transformer has died. These are the specs:

Power Transformer
Model: ED 21917
Pri.:115V~60Hz (Blk/Blue)
Sec.:10V~0.3A(Yel./Yel.)
For 965-10893-17691
Made in China

That is everything letter for letter that it says on top of the transformer.

The thing measures are as follows: 1-5/8" long x 1-1/4" (At the buldge of the wires coming out the sides.) x 1-5/16" tall.

Can anyone give me a link to a perfect replacement. I've been to mouser and i think i've found a hammond that is suitable, but mouser overwhelms me sometimes with their sheer volume of stuff...

Thanks!!

trixdropd

Not sure if this is xformer you found on mouser but its the one I woudl go for...
http://gb.mouser.com/ProductDetail/Hammond/161GA10/?qs=sGAEpiMZZMv4oUrzpPKU3GW7pSR3PqIpC4hJIY%2fbw4M%3d

RyUK

That looks like it will work. thank you!!

News:

transformer help