AMZ FX ANALOG ALCHEMY GEOFX MEF ROG MEF DIY WIKI

What would happen if

Started by dano12, November 12, 2009, 07:57:22 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

dano12

November 12, 2009, 07:57:22 PM
one was to put a fuzz face in the feedback loop of tube screamer?

earthtonesaudio

#1
November 12, 2009, 08:03:27 PM
I'll take a guess!

"SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS" (white noise)

Or:

"                                " (silence)

ianmgull

#2
November 12, 2009, 08:31:22 PM

petemoore

#3
November 13, 2009, 01:07:21 AM
  It'd turn the gain down, the DC resistance of the FF circuit is very high.
  I strongly suspect it'd also distort the -input, which doesn't expect FF type output strength.
  That's if it'd work at all, I'd say noise for sure, oscillation or signal cancelling, interesting circuit bend...with testclips, a FF and a TS, you could find out, I can't envision it'd necessarily damage anything, except maybe...well I'd do any initial testings with the volume not too high.
  http://www.geofex.com/
  Ignoring the diodes and capacitor for a moment, and assuming that the signal frequency is above the 720 Hz rolloff point of the Zi network, the gain of the clipping stage is (51K + drive control)/4.7K. This means the gain of the whole stage can be varied by changing the drive control setting between 1 + (551K/4.7K)= 107 (about 44db) and 1+ (51K/4.7K), about 12.
  So the opamp/circuit is looking for a resistance there to set gain.
Convention creates following, following creates convention.

frequencycentral

#4
November 13, 2009, 02:50:04 AM
Quote from: dano12 on November 12, 2009, 07:57:22 PM
one was to put a fuzz face in the feedback loop of tube screamer?

You mean you haven't done this yet Dano? Sheesh! Catch up................
http://www.frequencycentral.co.uk/

Questo è il fiore del partigiano morto per la libertà!

Venusblue

#5
November 13, 2009, 03:55:44 PM
Quote from: dano12 on November 12, 2009, 07:57:22 PM
one was to put a fuzz face in the feedback loop of tube screamer?

I lol'd at the possibility. Some one needs to do this, in the name of science!
I love the smell of baked tubes in the morning.

dano12

#6
November 13, 2009, 05:03:03 PM
Quote from: frequencycentral on November 13, 2009, 02:50:04 AM
Quote from: dano12 on November 12, 2009, 07:57:22 PM
one was to put a fuzz face in the feedback loop of tube screamer?

You mean you haven't done this yet Dano? Sheesh! Catch up................

No, I did the the tube screamer in the feedback loop of a fuzz face. This is different.  :icon_idea:

puretube

#7
November 13, 2009, 06:50:59 PM
DC-coupled?

sevenisthenumber

#8
November 13, 2009, 07:18:46 PM

earthtonesaudio

#9
January 10, 2012, 01:56:01 PM
well, this is the year for it.  c'mon peoples!

ugly_guitar_guy

#10
January 10, 2012, 02:32:41 PM
Quote from: Venusblue on November 13, 2009, 03:55:44 PM
Quote from: dano12 on November 12, 2009, 07:57:22 PM
one was to put a fuzz face in the feedback loop of tube screamer?

I lol'd at the possibility. Some one needs to do this, in the name of science!

Vid or it didn't happen.
Check out my metal band here: www.facebook.com/hollowshell
or
my personal effects building page here: www.facebook.com/brotronics

Greenmachine

#11
January 11, 2012, 10:45:03 PM
Then you'd be a Noise Musician.
Print
Go Up Pages1
User actions