Analog Delay from Russia

Started by Valentinych, February 26, 2010, 05:48:37 AM

Previous topic - Next topic

peterv999

Quote from: Valentinych on February 28, 2010, 12:20:45 PM
Quote from: mac on February 28, 2010, 10:04:37 AMIs it possible to increase the delay time to say 800ms -1000ms?
Mac, you can, but this will require 3 MN3005.

Quote from: peterv999 on February 28, 2010, 10:38:55 AMValentinych, this is a great design!!
Thanks, Peter!
What is a "dimishing"? Tell other words, please.
Filters are calculated in the program FilterPro (v.2.00.0017) by Texas Instruments Inc. But in the final version of my know-how.  ::) Everything is simple, but difficult to explain this in English.



Dimishing is for me as a Dutch person The signal "colour" in the feedback is getting darker each time it passes trough. It's like an old tape echo. Thanks for the TI filter link. now I can use standard resistors!! I have noticed that R34 is 0 Ohm?

Спасибо за отличный дизайн, Kind Regards

Peter




Renegadrian

Quote from: mac on February 28, 2010, 10:04:37 AM

Quoteseems like these images are blocked in my country "due to pedo-pornographic content".... damn!

This is because Mr. Berlusconi does not like pornography... :D :D

mac

Woh, you can say a lot of bad things about Silvio (and most of them are true!!!) But don't say he's not into porn!!!
He's a major pussy hunter (well, he has to pay for it a lot of times) and he always like to have some young and not so dressed women around him...

PS I can see those images...
Done an' workin'=Too many to mention - Tube addict!

Taylor

Indeed, but our president's tan is undeniably nicer.

Valentinych

#23
Quote from: peterv999 on February 28, 2010, 01:18:29 PMDimishing is for me as a Dutch person The signal "colour" in the feedback is getting darker each time it passes trough. It's like an old tape echo.
OK, everything is clear. Indeed, the sound is reminiscent of old tape echo.

QuoteI have noticed that R34 is 0 Ohm?
The diagram shows the R34, but it is not on PCB, so typical =0 kOhm.

raulgrell

Quote from: Taylor on February 28, 2010, 07:48:19 PM
Indeed, but our president's tan is undeniably nicer.

Not as nice as our dear brazilian president, Luiz Inacio Lula da Silva's missing pinky =)

On a more serious note, thank you very much, Valentinych, this is truly a work of art =)

jrc4558

Quote from: frank_p on February 26, 2010, 12:42:56 PM

Hey, welcome to the forum !  Nice to have some Russians here.  It looks like there are not too many.  Stay wih us !


Hey! :D

Valentinych


edd101

#27
Hello/здарова!

I'm russian too 8)
...it is always funny until someone gets hurt!!!

kupervaser


Valentinych

It's time to open Russian House!  :icon_biggrin:

Кто будет переводчиком с русского на ангельский?  :icon_wink:

markeebee

Valentinych, this is very very cool, thanks for sharing with us.

I think it is the Arshavin of delay designs - small and wonderful!

kupervaser

Quote from: Valentinych on March 02, 2010, 06:42:02 AM
It's time to open Russian House!  :icon_biggrin:

Кто будет переводчиком с русского на ангельский?  :icon_wink:

Davaj po ocheredi!

Valentinych

Quote from: markeebee on March 02, 2010, 07:27:17 AMI think it is the Arshavin of delay designs - small and wonderful!
Thanks, this is a very high score my little work.  :icon_rolleyes:

QuoteDavaj po ocheredi!
Kupervaser, translator need me!
Я очень прохо говорю по английски. И совсем не понимаю слэнг, которым здесь пользуются. Так что буду рад любому помощнику-толмачу.

kupervaser


QuoteDavaj po ocheredi!
Kupervaser, translator need me!
Я очень прохо говорю по английски. И совсем не понимаю слэнг, которым здесь пользуются. Так что буду рад любому помощнику-толмачу.
[/quote]

Valentin, xorosho, ja tebe perevedu, tolko pishi mne messages a to ja inogda na forum ne xozu, mogu propuskat tovoi posti. Proinstalliruju skoro cirillyc, shtob karakuljami tebe ne pisat

frank_p

Quote from: kupervaser on March 02, 2010, 07:34:13 AM
Quote from: Valentinych on March 02, 2010, 06:42:02 AM
It's time to open Russian House!  :icon_biggrin:

Кто будет переводчиком с русского на ангельский?  :icon_wink:

Davaj po ocheredi!

Quote from: edd101 on March 02, 2010, 03:56:47 AM
Hello/здарова!

I'm russian too 8)

Quote from: Constantin Necrasov on March 01, 2010, 03:54:19 PM
Quote from: frank_p on February 26, 2010, 12:42:56 PM

Hey, welcome to the forum !  Nice to have some Russians here.  It looks like there are not too many.  Stay wih us !


Hey! :D

Wooops !   :icon_lol:
Моя мати знаходиться на Україні, але я кажу дуже мало ...   :icon_frown:


Thomeeque

Quote from: Valentinych on March 02, 2010, 10:03:17 AM
Я очень прохо говорю по английски. И совсем не понимаю слэнг, которым здесь пользуются. Так что буду рад любому помощнику-толмачу.

Common, your English is not so bad, I did fully understand what you were saying so far.. Slang and idioms can be pain, but you can always use google, just search for the given phrase and it will find you explanation (e.g.).

Just my two cents :icon_wink: (did I use it correctly? :icon_mrgreen:) T.
Do you have a technical question? Please don't send private messages, use the FORUM!

Valentinych

Quote from: Thomeeque on March 02, 2010, 04:51:36 PMJust my two cents :icon_wink: (did I use it correctly?)
We say: "my three cents" (мои три копейки).  :icon_mrgreen:

kupervaser

Yes 3 kopeiks.

O i Xoxli zdes, ta i ja sam Xaxol!! xa

Valentinych

Damn! I love this topic starts about analog delay from Russia! :icon_lol:  :icon_lol:  :icon_lol:

Thomeeque

Quote from: Valentinych on March 03, 2010, 02:58:49 AM
Quote from: Thomeeque on March 02, 2010, 04:51:36 PMJust my two cents :icon_wink: (did I use it correctly?)
We say: "my three cents" (мои три копейки).  :icon_mrgreen:

Really? That's funny! :) Maybe this idiom was imported to USA from your country in the days of yore and either

A) it was adjusted by actual RUB/USD ratio or
B) you Russians are 50% more sure about things you are saying than Americans

:icon_wink: T.

Do you have a technical question? Please don't send private messages, use the FORUM!