Help with Dr. Boogie build. (PLEASE?)

[elenore19]

Hi everyone,
So I'm attempting the Dr. Boogie build (gaussmarkov).
I'm using this diagram for wiring up the switch.

I'm having trouble finding where the Board Output is, the board's DC+ is, and clarifying where the Board's Ground is as well would be nice ( believe I know which one it is already...but not sure)
Here's a link to the project.
http://gaussmarkov.net/wordpress/circuits/dr-boogey/
I want to make sure just so I don't fry anything, I really don't have many backup transistors or anything else of the sort.
Thanks for the help!

-Elliot

[jkokura]

The middle lug of the the Volume pot is the output. 9V is in the bottom right corner looking at the layout. It's hard to find because the word is kinda mixed up with the Ground word. The power connects to that little square, and the ground is the outer trace. Look carefully and you'll figure it out.

jacob

[elenore19]

The middle lug of the the Volume pot is the output. 9V is in the bottom right corner looking at the layout. It's hard to find because the word is kinda mixed up with the Ground word. The power connects to that little square, and the ground is the outer trace. Look carefully and you'll figure it out.

jacob

Fantastic, thanks!
I sort of saw that weird V down there, thinking that had to be it. But I've fried many parts before, so I wanted to be sure.
Thanks again.

[tasos]

what trannsistor dd you use?i have trouble finding the j201....