Wiring 3pdt into TS808 Re-issue

[Subaro0o]

 Hey guys, I just finished the Monte Alumm mods on my pedal, thing sounds AWESOME! Now the next step is to get the 3pdt switch wired in, I tried wiring it in last night using a generic 3pdt wiring diagram but didnt have any success.. Anyone have any pics or anything that will help me get this right?  Thanks in advance!

[Subaro0o]

I found this picture from a guy who offers this wiring as a service, The input and Output and jumper are straight forward, Now what about the red and black in the corners.. I'd assume these were the 2 wires from the original switch, but how do I wire the LED and get it to all work.. sorry I'm really anxious to get this done!

[MikeH]

The red and black wires are to turn the LED off and on

[neurino]

Sorry if I step in slightly off topic...

I recently won an ebay auction and got a TS9DX as new for 40euro shipped.
While waiting I planned to make some mods, true bypass included.

I built several true bypass loopers and I play from more then 18 years so I guess I can discern when my guitar sounds "different" in a switched off buffered pedal.

Well I'll definitively NOT make the true bypass mod to my TS9DX since I put it in a true bypass looper and really, really can't hear any noticeable nor subtle change in the sound if true bypassed or not...

I tested the TS9DX with a Laney L5T, a Fender American Statocaster and a Gibson Les Paul Junior Special.

I think the same could be valid for a TS808 reissue so... is it really nesessary?

P.S.: I know with a lot of pedals chained the situation could be different...