Etched enclosures

[seedlings]

^ etch and knobbies are fantastic!  What controls did you use for the superduper 2-in-1?

CHAD

[Hexjibber]

^ etch and knobbies are fantastic!  What controls did you use for the superduper 2-in-1?

CHAD

Thanks man! The lower two controls are the level control for each SHO circuit and the top one is the master level control.

[hylandren]

motvej, excellent etch!
I also like those knobs with one end of the tops cut at an angle like that. Do you remember where you got them?

[nicoo]

Quick and dirty build of a MXR Distortion+ (with AA116 germanium diode)




Inspired from far by the awesome...

[motvej]

quote author=hylandren link=topic=85803.msg977785#msg977785 date=1402572304]

motvej, excellent etch!
I also like those knobs with one end of the tops cut at an angle like that. Do you remember where you got them?
[/quote]

thanks man!!
they are from simpe offline electronic parts shop in moscow)
I didnt ever seen those knob on tayda, smallbear or smth else...


my new atari punk console with LFO

[italianguy63]

Fixed my Dyna Comp (1977) clone today.  I've done about 4 of these now.  Getting better at them, and on the etching too...   



And a gut shot -- with mojo, "1977 era" components...



Works great.  That's the best part.

MC

[Liquitone]

Nice one! You really caught the classic mxr look if I compare it to my 1978 distortion+. I first thought it was a re-housing.

[italianguy63]

Note the .05uF cap.  (not a .047).    Thanks!

[Hexjibber]

Great etch man! Really clean, I like it!

[deadastronaut]

nice work guys..you can't beat an etch when it comes out nice..

[Alejandro B.]

Inspired from far by the awesome...

Thank you man, I´m so flattered both by your words and your inspired pedal... 

That´s the great thing about this site, you get a huge bunch of ideas to make your pedals.

I have also get more than two or three ideas from here to make my own pedals (guts or finishes) 

Thank you again for your kind words and nice work. You´ll see how etch by etch they become more easy and complex... it´s just a matter of practice!! (if you want the original crocodile skin image I can send it to you  )

[Hexjibber]

OCD v3 with 2000AD artwork by request of my mate who it's for

[italianguy63]

Not my best work (but not my worst either).  My Swah V3.

My 1st attempt at a reverse etch.  Came out well, but, the detail was too small, the etch was not deep enough, and I learned that "grey scale" images won't work.

Anyway, had to repaint the background because of the shallow etch.  Came out pretty well really (better than the pic/glare), and the concept was good.



And a gut shot:



MC

[Mustachio]

Looking good Mark, did you do the board for the snow white too ? Really like that dynacomp too!

I missed a bunch of posts in this thread, wow you guys are getting such great detail! Awesome looking artwork, Always pushing the bar up! Good Jarb Guy's !

[italianguy63]

Jimbo-- Nahhh... not reinventing the wheel.  I wanted to do an autowha (envelope filter).  The board was on sale at GuitarPCB.  It is just "good."  Not as good as I hoped-- so, I have one of RG's Neutrons coming-- rolling some vactrols as we speak.  Still with one foot in the fuzz.  Starting on some Muffs too.  Idle hands are the Devil's work.

MC

[Mustachio]

Sweet the Neutron is one of my favorite builds of all time!

[italianguy63]

I build and seek till I get it right (mostly).   

[Jdansti]

Nice work, Mark!   

[glops]

I always forget about this thread  Haven't been building a whole lot lately  Some outstanding etches over here these days!

Here's Madbean's 424, the Demo Tape Fuzz. Haven't played it loud but its a very interesting lo-fi overdrive fuzz. Sounds very
unique and quite an easy build.


Here's a Foxx Tone Machine

[SmoothAction]

Killer stuff glops!