'LIGHTWAH'

[~arph]

perhaps a good idea to have two versions?

I'll see if I can get a schematic and layout going too.. (with my mods included)

[ronnie]

I guess what I'm trying to say is, in the Diy layout creator program their are 3 views to choose from
under board properties, Stripboard, perfboard and Pcb, The current picture above is perfboard,
I was asking if we could see the perfboard image which shows all the traces and the
Pcb image so we could print and make the circuit, hope this makes sense,

[ronnie]

ooops, I meant,  the Picture above is Stripboard,

I wanted to see the perfboad and pcb images as well if possable

[tasos]

@arnoud...

This way we only need a single TL074   and a transisor.

if it works as good you can post a schematic!

[ronnie]

Hi ronnie,

There is no other layout then this vero layout.
As for the traces,

The horizontal lines are connected (labled with the letters a,b, c etc. )

I guess what I'm trying to say is, in the Diy layout creator program their are 3 views to choose from
under board properties, Stripboard, perfboard and Pcb, The current picture above is Stripboard,
I was asking if we could see the perfboard image which shows all the traces and the
Pcb image so we could print and make the circuit, hope this makes sense,

[~arph]

No it is not three views on the same layout.. you need to create the layout for each view if you want.
Currently there is only a layout made for stripboard. You can't view this as perf or pcb by just changing the board type.
There is no perf or pcb layout made yet.

[Valoosj]

cheers hhe, i'll take a look.....i feel a steep learning curve heading my way!....

Robert, I strongly recommend diptrace. It's an awesome program with barely any learning curve. I did make my own library with the necessary components, but other than that it's been nothing but fun with this program. I have tried eagle, DIYLC and such, but this really is the best thing since sliced bread.

[sundgist]

Nice...

I've got a Morley classic wah which I've modded and added selectable pre or post distortion. There's still some room left in the enclosure for a LFO on an extra bit of board. Hmmm... just need to find some space for the knobs.

[deadastronaut]

@ronnie, thats vero for ya!.i had a go at making the vero pcb, but the way its laid out there would be a few horrible jumpers and its wide too.....we'll get there in the end ok....

@tasos.its the 1590b..i was thinking of!..nice and small and board friendly...(and mainly because ive etched 2 boxes..

the inner dimensions..55 mm max width ok. for the 1590b..eddystone box...

the vero layout is to wide for a 1590b though so its got to be squeezed in a bit ok...


@arnoud, cool, didnt think of plastic jacks..i see where your coming from now!...in 1 quad too....brilliant idea!...yep i think your version would have to be a 1590bb.....oh and no signal loss too....great!..
and yeah, do a scemo of yours too...excellent!

@yorick, cheers man, i'll take a peek when i get the time cheers ...

@all, i think arphs is going to be a nice project too guys, in fact i would make mine now without the pulse, as it drops in leve too much,
but all you have to do is just leave off that switch...sorted...waheeyyyyyyy..................

look forward to how this is all going to pan out...oh pan...lets make a stereo one joking...for now!.

[ronnie]

Very cool, Thanks man,
Looking forward to it, cain't wait to make this one

[tasos]

hey...i just drawn the schem...have an eye on it before i convert that to pcb!

[tasos]

hey...i just drawn the schem...have an eye on it before i convert that to pcb!
http://img30.imageshack.us/i/pulsewahschem.png/

[deadastronaut]

go for it tasos!...what prog are you going to be using for pcb image?

[isildur100]

Can't wait to build this one!

[tasos]

hey!the pcb is chaotic and the auto placement is not working properly....i will probably use another programm...i have done a pcb of the timer....
http://img843.imageshack.us/img843/8082/timerlayout.jpg
http://img143.imageshack.us/img143/6861/pcbb.jpg i have also reversed it!ready to print!

[askwho69]

GO GO GO!

[ronnie]

Awesome

[gnognofasciani]

Can anyone take a look if the following schematic?

I've modded depth control, wich is now on the led side, and added input and output buffers; if it is correct i can post a layout (unverified  )!

If arp provides his version I can make a layout as well  

[~arph]

I had a quick look, looks ok. Can't spot any errors.

I'll see if I can get a schematic together this weekend. Will do the layout myself.

[deadastronaut]

cool guys!...

had lots of grief with my pc today....had to do full install...arghhhhhhhhhh..still tinkering.