Dam Drag'n'Fly PCB

[clamup1]

hey this is the first time ive done this. can anyone check this for me. i traced it from this


hope you guys can see this. i can never get it right

[clamup1]

any takers?

[Cardboard Tube Samurai]

2nd pic too small

[Jhouse]

The second picture is too small.

Darn it. Cardboard Tube Samurai beat me to it.

[clamup1]

i was afraid of that. can i email it to you?

photobucket used to offer 4 or 5 different sizes you could pick. i dont know what happened to those options.

[Jhouse]

Private Messaged.

[clamup1]

thanks Jhouse. ill etch a board and see if it works. i perfed one and it didnt work. i might try debugging it.

[slacker]

Can't see the tiny picture, but what you've done a layout for is a Fuzz Face with a blendable input cap, if that's what it's supposed to be then I think you're good to go

[clamup1]

i couldnt tell you what its supposed to be. i found it on another diy website. the youtube vid for it sounded cool. supposedly it was used on the first couple Zepplin albums. i have germ npn trannies but theyre switching trannies. i used them on the perf and it didnt work. i dont know if its something i did or there not supposed to be used in this way. my wife has put a veto on anymore parts spending for right now so im gonna have to wait.

heres the link for it
http://www.youtube.com/watch?v=ghkbK079O9w

[Jhouse]

So I just read some stuff that Mark (IvIark) wrote. He is redoing the layout that you have because it was unverified. He says that he recently got a verified schematic and he is redoing the layout. HERE's what I read. I'll see if I can't get the schematic off of him.

[clamup1]

well that would explain alot lol. thanks jhouse

[IvIark]

Here's the schematic, I've been doing other things and so haven't had chance to update the layouts yet.

[slacker]

So Vox Tonebender with a blendable input cap. Should be able to build that using pretty much any Fuzz Face PCB.

[clamup1]

sweet, thanks Iviark

[Jhouse]

Well, my chemistry class got canceled today so I threw these together. Sorry they aren't the best/most efficient. I was bored, but I still need to get some homework done. I have no idea what the transistors are to tell you the truth.

[clamup1]

jhouse i made a pcb also. but ill take yours over mine lol. thanks

i would love to know how you guys know how to trace all this out. i trace it almost exactly like the schem

[Jhouse]

I  usually start at the beginning of the schematic's input and go from there. I usually end up changing a lot of things while I'm doing the layout though to make it smaller.

[clamup1]

thats what i do only it turns out as long as the schem. i guess i need more practice

[Jhouse]

Dang it. I screwed up on that last layout. I put 2 C4's and messed up 1 trace that would throw the whole pedal off.   Oh well. Here's a new layout. I hope you didn't etch the board yet.

Also, on this one R3 should be 1m. Man I didn't check this at all. 

[clamup1]

yeah i kinda did. oh well. i did notice the 10m, good thing i looked at the schem. thanks for doing this for me