silicon fuzz face schematic?

[davepedals]

i search at least 20 minutes for this, can anyone throw me the link to the schematic?
thanks!

[LucifersTrip]

i search at least 20 minutes for this, can anyone throw me the link to the schematic?
thanks!

good luck

[petemoore]

  Fuzzcentral's is worth a look, it bumps up the 330 value and puts a HF taming capacitor across it.

[darron]

and geofex....:



http://www.geofex.com/article_folders/fuzzface/fffram.htm

[petemoore]

   The gains of the transistors matters.
 ''8k2'' doesn't adjust.
   Q2C resistor should be adjusted so the circuit bias is 'correct' [by ear.
   5k6 through 15k6 is a good range for most Si transistors, and doesn't tend to gate-out at either end of the trimpot or knob rotation.
  A 5k6 > 10k pot in place of ''8k2''.
  Could be 20k trimpot or panel pot.
  Makes it possible to sweep the DC bias and try settings by ear, or by adjusting to various idle-voltages on Q2C and trying possible bias's out for a while.
  Another thing to do when choosing transistors and such is to use the guitar volume if you want to find the 'cleans up at guitar volume' = gain adjustment.

[digi2t]

I just built this one recently;



Flexible insofar that it will accept a variety of trannies, with the 10K trimmer allowing to bias. I'm running mine with 2N3904 in Q1, and 2N5088 in Q2. I like a bit more fur on my fuzz.

Cheers,
Dino

[digi2t]

I almost forgot, I recorded a clip the other day, here's the link;

http://www.soundclick.com/player/single_player.cfm?q=hi&songID=10427001

The first 1:00 is the Axis Face, starting with clean, minimum fuzz, medium fuzz, and max fuzz. I built the circuit into a Skyripper, and the rest of the clip is with the Omega booster, and yhen Ripper engaged, so you can ignore the rest from 1:00 on if you wish.

[Renegadrian]

don't want to be rude,but man did you ever try to google it?! google images will give you more than one!!! 
I always search for what I need thru it,and ask only when I cannot find what I'm after...but man, FF schem...
we could say the internet is for porn and FF schematics!!! 

[digi2t]

don't want to be rude,but man did you ever try to google it?! google images will give you more than one!!! 
I always search for what I need thru it,and ask only when I cannot find what I'm after...but man, FF schem...
we could say the internet is for porn and FF schematics!!! 

Ooooo... naked fuzz.... drooooollll 

[deadastronaut]

yeah google is your friend...

i use it mostly for porn......

like this...

http://www.diystompboxes.com/smfforum/index.php?topic=36392.0

[davepedals]

i Do google!  but unless i spelled it wrong last night, i couldn't find anything but the vero layouts.  tonight...i find everything! 
anyway, thanks for all the detailed info.