Mad: Little Green Wonder Debug

[Rawkcraze]

well ive seen old forums of the "clone wars" on this pedal and im looking to make one of my own. i have a few different references that to help me with this build, and ive actually just need help debugging it.
when i turn on the pedal it has a high pitched ossilating/whiney noise, and the clipping leds light up. then when i start playing it goes away but comes back the second i stop. when i turn the gain down and/or the volume down it goes away, but then its too quiet to play. sounds like a feedback issue, but it could also be something internally. i want to try fixing it. could it be a grounding issue?

i just have a few questions if anyone wants too help look at these pcb's and schematics.

heres the link to the one i made: http://schematic.exteen.com/little-green-wonder-layout
What goes right below the 2 clipping leds, where there isnt anything assigned?
and for the 2sk170, ill have to flip the S and the G on it correct?
see anything else wrong with this layout compared to the actual schematic? here's the real schematic:

http://www.google.com/imgres?q=little+green+wonder&um=1&hl=en&biw=1249&bih=588&tbm=isch&tbnid=H4bUBNNUyVPQhM:&imgrefurl=http://www.newtone-online.nl/forum/index.php%3Ftopic%3D1355.45&docid=KT50E0vduxus6M&imgurl=http://www.newtone-online.nl/forum/index.php%253Faction%253Ddlattach%253Btopic%253D3995.0%253Battach%253D4561&w=828&h=579&ei=pNEAT8LiJ8KMgwfl8NSWAg&zoom=1&iact=rc&dur=220&sig=111042161584776117766&page=5&tbnh=106&tbnw=152&start=94&ndsp=24&ved=1t:429,r:1,s:94&tx=106&ty=52

thanks again!

[pedalgrinder]

i seriously wouldn't trust the layouts on that eixteen site most i've looked at on there are wrong wrong wrong.

[stringsthings]

What goes right below the 2 clipping leds, where there isnt anything assigned?

those 2 solder pads below the LEDs are there in case the user wants to use a different diodes for clipping